L2Tp Dial-Out Connecting-Timer-Value - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp dial-out connecting-timer-value

[ no ] l2tp dial-out connecting-timer-value connectingTime
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum amount of time allowed for successful establishment of an L2TP
Description
dial-out session. The no version restores the default value, 30 seconds.
Options
Global Configuration
Mode
1164
l2tp dial-out connecting-timer-value
connectingTime—Range 30–3600 seconds