Mpls Traffic-Eng Administrative-Weight - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls traffic-eng administrative-weight

mpls traffic-eng administrative-weight weight
Syntax
no mpls traffic-eng administrative-weight
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the administrative weight for the interface. The no version restores the
Description
default value, which matches the IGP-determined weight (cost).
Options
Interface Configuration, Subinterface Configuration
Mode
1426
mpls traffic-eng administrative-weight
weight—Administrative weight, a value in the range 0–4294967295 supersedes
any weight conferred upon the link by the IGP