Ip Use-Framed-Routes Ip-Subscriber - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip use-framed-routes ip-subscriber

[ no ] ip use-framed-routes ip-subscriber
Syntax
Command introduced in JUNOSe Release 8.1.0.
Release Information
Configures the router to enable a static primary IP interface to use the RADIUS
Description
Framed-Route attribute [22]. The primary IP interface applies the framed routes as
source IP addresses when creating and configuring dynamic subscriber interfaces.
The no version disables the primary IP interface support of the Framed-Route RADIUS
attribute.
Interface Configuration
Mode
968
ip use-framed-routes ip-subscriber