Graceful-Restart Restart-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

graceful-restart restart-time

[ no ] graceful-restart restart-time restartTime
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the estimated time for the restarting OSPFv2 router to reacquire OSPF
Description
neighbors that were fully functional prior to the restart. When this timer expires, the
restarting router exits the restart procedure, originates any LSAs that were suppressed
during the restart, removes any self-originated LSAs that it received from helping
neighbors, runs SPF, and updates any routes in the routing table. The no version
returns the restart duration timer to its default value, 180 seconds.
Options
Router Configuration
Mode
670
graceful-restart restart-time
restartTime Number of seconds during which the restarting router can reacquire
OSPF neighbors that were fully functional prior to the restart; in the range 1–1800