Ip Igmp Static-Include - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip igmp static-include

[ no ] ip igmp static-include sourceAddress groupAddress
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns an interface to handle multicast traffic for one or more (S,G) combinations.
Description
The no version removes the (S,G) association from the interface.
Options
Interface Configuration, Profile Configuration
Mode
sourceAddress Address of the source
groupAddress Address of the group
Chapter 10: I Commands
839
ip igmp static-include