L2Tp Shutdown Session - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

l2tp shutdown session

[ no ] l2tp shutdown session { destinationName |
Syntax
[ virtual-router vrName ] ip ipAddress sessionName }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Closes a specific session. The no version has no effect because all L2TP sessions are
Description
dynamic and cannot be restarted after they have been shut down.
Options
Global Configuration
Mode
destinationName Name that the router assigns to the LNS
vrName Name of the virtual router on which the destination exists
ipAddress IP address of the LNS
sessionName Name of the session
Chapter 12: L Commands
l2tp shutdown session
1189