Hdlc Keepalive - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

hdlc keepalive

hdlc keepalive [ seconds ]
Syntax
no hdlc keepalive
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a keepalive value. The keepalive mechanism tracks the health of the
Description
connection. The no version turns off the keepalive feature.
Options
Interface Configuration, Subinterface Configuration
Mode
684
hdlc keepalive
seconds Keepalive timeout period in the range 0–6553 seconds; default value
is 10. A value of zero (0) turns off the keepalive feature.