Ipv6 Ospf Priority - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 ospf priority

ipv6 ospf [ processId ] priority intfPriority
Syntax
no ipv6 ospf [ processId ] priority
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the router priority. Used in determining the designated router for the particular
Description
network. This designation applies only to multiaccess networks. Every broadcast and
nonbroadcast multiaccess network has a designated router. The no version restores
the default value.
Options
Interface Configuration, Subinterface Configuration
Mode
1086
ipv6 ospf priority
processId Integer in the range 1–65535
intfPriority Priority value, an 8-bit number in the range 1–255; default value
is 1