Dvmrp Destination Profile - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

dvmrp destination profile

dvmrp destination profile profileName { [ any-virtual-router ] |
Syntax
[ virtual-router virtualRouterName ] }
no dvmrp destination profile profileName
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures a destination profile for dynamic DVMRP tunnels and enters IP Tunnel
Description
Destination Profile Configuration mode. There is no no version.
Options
Global Configuration
Mode
554
dvmrp destination profile
profileName Name of the destination profile
any-virtual-router Specifies a default destination profile for all virtual routers;
only one default destination profile can be defined in the system
virtualRouterName Name of the transport virtual router