Page 1 JUNOSe Software for E Series Broadband Services Routers System Event Logging Reference Guide Release 11.1.x Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Published: 2010-03-24...
Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”)
Page 4 (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 http://www.gnu.org/licenses/gpl.html...
Page 5 agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein.
Page 7 Abbreviated Table of Contents About the Documentation Part 1 Chapters Chapter 1 System Logging Overview Chapter 2 Event Categories Part 2 Event Categories Chapter 3 A Commands Chapter 4 B Commands Chapter 5 C Commands Chapter 6 D Commands Chapter 7 E Commands Chapter 8 F Commands...
Page 8 JUNOSe 11.1.x System Event Logging Reference Guide viii...
Page 9: Table Of Contents
Table of Contents About the Documentation E Series and JUNOSe Documentation and Release Notes ......xxi Audience ......................xxi E Series and JUNOSe Text and Syntax Conventions ........xxi Obtaining Documentation ................xxiii Documentation Feedback ................xxiii Requesting Technical Support ..............xxiii Self-Help Online Tools and Resources ..........xxiv Opening a Case with JTAC ..............xxiv Part 1 Chapters...
Page 10 JUNOSe 11.1.x System Event Logging Reference Guide aaaQosCfg .....................28 aaaServerGeneral ..................29 aaaUserAccess ....................29 addressServerGeneral ..................30 ar1AaaServerGeneral ..................30 atm .......................31 atm1483 .......................32 atm1483VcClass ....................32 atmAal5 ......................33 atmVcClass ....................33 auditIpsec ......................34 Chapter 4 B Commands bfdAdaptivity ....................35 bfdEvents ......................36 bfdGeneral ....................36 bfdSession .....................37 bgpConnections ....................37 bgpDampening ....................38 bgpEvents .....................39...
Page 11 Table of Contents Chapter 6 D Commands dcm .......................58 dcmEngineGeneral ..................58 debounceEvents ....................59 debounceGeneral ..................59 dhcpCapture ....................60 dhcpExternal ....................60 dhcpExternalEngine ..................61 dhcpGeneral ....................61 dhcpIssuLog ....................62 dhcpLocalClients ...................63 dhcpLocalGeneral ..................63 dhcpLocalHighAvailability ................64 dhcpLocalPool ....................64 dhcpLocalProtocol ..................65 dhcpOfferLog ....................66 dhcpPbeGeneral ....................66 dhcpProxyGeneral ..................67 dhcpRelayGeneral ..................67 dhcpRelayNvWriterGeneral ................68 dhcpv6Client ....................68...
Page 12 JUNOSe 11.1.x System Event Logging Reference Guide frameRelay ....................84 fsAgent ......................84 ft1 .........................85 ftpClient ......................85 ftpServer .......................86 Chapter 9 G and H Commands gplaan ......................87 ha ........................87 hdlc .......................88 hotfixGeneral ....................89 httpServer .....................89 Chapter 10 I Commands icImageFixServer ...................92 icmpTraffic ....................93 icmpv6Traffic ....................94 icrPartitionManager ..................95 igmpGeneral ....................95...
Page 13 Table of Contents ipv6Types ....................115 isisAdjChange ....................115 isisAdjPackets ....................116 isisBfdEvents ....................117 isisChecksumErr ..................117 isisGeneral ....................118 isisHelloGeneral ...................119 isisHelloPackets ...................119 isisIpv6Log ....................120 isisLdpEvents ....................120 isisLocalUpdate ...................121 isisMplsTeAdvertisements ................122 isisMplsTeEvents ..................122 isisNsfEvents ....................123 isisProtocolErr .....................123 isisSnpPackets .....................124 isisSpfEvents ....................124 isisSpfStatistics ....................125 isisSpfTriggers .....................126 isisUpdatePackets ..................126 isVoice ......................127 itm ......................127...
Page 14 JUNOSe 11.1.x System Event Logging Reference Guide localLinePassword ..................144 Chapter 12 M Commands macroData ....................146 macroSchedular ..................146 mgtmGeneral ....................147 mgtmGracefulRestart ..................148 mgtmv6General ..................148 mgtmv6GracefulRestart ................149 mldGeneral ....................150 mldGracefulRestart ..................151 mldGroupState ....................151 mmcd ......................152 mobileIpv4HaBinding ..................153 mobileIpv4HaEng ..................153 mobileIpv4HaEvent ..................154 mobileIpv4HaLog ..................154 mplsFwdTable .....................155 mplsGeneral ....................155 mplsHighAvailability ...................156...
Page 15 Table of Contents ospfGeneral ....................173 ospfHelloPktsRcvd ..................174 ospfHelloPktsSent ..................175 ospfInterface ....................176 ospfLdpEvents .....................176 ospfLsa ......................177 ospfNeighbor ....................178 ospfPktsRcvd ....................178 ospfPktsSent ....................179 ospfRestart ....................179 ospfRoute ....................180 ospfSpfExt ....................181 ospfSpfInter ....................181 ospfSpfIntra ....................182 ospfTeDatabase ...................183 ospfTeSpf ....................183 ospfv3ElectDr ....................184 ospfv3General .....................185 ospfv3HelloPktsRcvd ...................186 ospfv3HelloPktsSent ..................186 ospfv3Interface ...................187 ospfV3Lsa ....................188...
Page 16 JUNOSe 11.1.x System Event Logging Reference Guide pimsmGeneral .....................208 pimsmMvpn ....................209 policyMgrAttachment ..................209 policyMgrGeneral ..................210 policyMgrPacketLog ..................210 ppp ......................211 pppoe ......................212 pppoeControlPacket ..................212 pppPacket ....................213 pppStateMachine ..................214 profileMgr ....................214 Chapter 16 Q Commands qm ......................217 qos ......................217 qosAttachment ....................218 Chapter 17 R Commands radiusAttributes ...................219 radiusClient ....................220...
Page 17 Table of Contents serviceMgrPerformance ................237 serviceMgrServiceDef ..................237 serviceMgrServiceInstance ................238 serviceMgrServiceSession ................238 serviceMgrSubscriberSession ...............239 slep ......................239 snmp ......................240 snmpIfMib ....................241 snmpPduAudit ....................241 snmpSetPduAudit ..................242 snmpTrap ....................242 sonet ......................243 sonetPath ....................243 sonetVT .......................244 ssccDetailPm ....................244 ssccDetailSsc ....................245 ssccGeneral ....................245 ssccLacGeneral ....................246 ssh ......................247 stTunnel ......................247 stTunnelEngine ...................248 system ......................248...
Page 18 JUNOSe 11.1.x System Event Logging Reference Guide Part 3 Index Index ......................267 xviii Table of Contents...
Page 19: List Of Tables
List of Tables About the Documentation Table 1: Notice Icons ...................xxii Table 2: Text and Syntax Conventions ............xxii Part 1 Chapters Chapter 1 System Logging Overview Table 3: Log Severity Descriptions ..............4 List of Tables...
Page 20 JUNOSe 11.1.x System Event Logging Reference Guide List of Tables...
Page 21: About The Documentation
If the information in the latest release notes differs from the information in the documentation, follow the JUNOSe Release Notes. To obtain the most current version of all Juniper Networks® technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/...
Page 22: Table 1: Notice Icons
JUNOSe 11.1.x System Event Logging Reference Guide Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death. Laser warning Alerts you to the risk of personal injury from a laser.
Page 23: About The Documentation
CD-ROMs or DVD-ROMs, see the Offline Documentation page at http://www.juniper.net/techpubs/resources/cdrom.html Copies of the Management Information Bases (MIBs) for a particular software release are available for download in the software image bundle from the Juniper Networks Web site at http://www.juniper.net/...
Page 24: Self-Help Online Tools And Resources
7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
Page 25: Chapters
Part 1 Chapters System Logging Overview on page 3 Event Categories on page 23 Chapters...
Page 26 JUNOSe 11.1.x System Event Logging Reference Guide Chapters...
Page 27: System Logging Overview
Chapter 1 System Logging Overview E Series Broadband Services Routers enable you to log system events to discover and isolate problems with your system. This chapter explains how to use the command-line interface (CLI) to monitor your system’s log configuration and stay informed about all system events that you want to track.
Page 28: Log Verbosity
JUNOSe 11.1.x System Event Logging Reference Guide NOTE: Not every event category supports every severity level. For a list of event categories and the severity levels that each category supports, see “Event Categories” on page 23. Table 3: Log Severity Descriptions Severity Number Severity Name System Response...
Page 29: Logging Platform Considerations
For information about the modules supported on E Series routers: See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router. See the E120 and E320 Module Guide for modules supported on the Juniper Networks E120 and E320 Broadband Services Routers.
Page 30 JUNOSe 11.1.x System Event Logging Reference Guide Use to set a baseline for logging events. Only log messages timestamped after baseline log the baseline appear when you enter the show log data delta command. To use the current system time, do not enter any options. To set a specific time, use the following syntax: Hour:Minute[:Second] Current time in 24-hour format.
Page 31 Chapter 1: System Logging Overview exclude Logs all categories to system log except the listed categories; all other categories are logged unless specifically excluded by issuing this command again. Issuing an include command after an exclude command (or vice versa) overrides the earlier command.
Page 32 JUNOSe 11.1.x System Event Logging Reference Guide Example 6 The first command causes the isisGeneral event category to be excluded from logging to system log at 10.1.2.3; all other events are logged. The second command overrides the first and causes the exclusion of all events except ospfGeneral.
Page 33 Chapter 1: System Logging Overview Use to enable logs destined for a console to be displayed at the current console. log here By default, the local console automatically receives all log messages if console is a destination. The exception is the cliCommand log, whose log events do not appear on the console.
Page 34: Configuring Log Severity For Individual And Systemwide Logs
JUNOSe 11.1.x System Event Logging Reference Guide Use to remove the limit on the number of outstanding buffers for an event log unlimit category, such as when the system is dropping logs of a particular category. Example host1(config)#log unlimit qos Use the no version to return to the default value.
Page 35 Chapter 1: System Logging Overview using systemwide level commands until you return the event category to its default, unassigned state by using the no log severity eventCategory command. To return all logs, systemwide and individual, to their default, unassigned severity level, use the no log severity * command.
Page 36 JUNOSe 11.1.x System Event Logging Reference Guide aaaServerGeneral WARNING aaaUserAccess WARNING addressServerGeneral WARNING ar1AaaServerGeneral WARNING WARNING atm1483 WARNING atmAal5 WARNING Change the atm category to have a log severity of Emergency and view the log configuration: host1(config)#log severity emergency atm host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL...
Page 37 Chapter 1: System Logging Overview Notice that the atm event category that you individually assigned in Step 3 does not change. Turn off log notification, systemwide, and view the log configuration: host1(config)#log severity off host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering...
Page 38: Configuring Log Verbosity For Individual Logs Or All Logs
JUNOSe 11.1.x System Event Logging Reference Guide Notice that the atm event category follows the systemwide severity level of OFF. The systemwide setting takes precedence over the atm event category default of Error. Change all event categories, systemwide, to their default/unassigned levels, and view the log configuration: host1(config)#no log severity * Please wait..
Page 39 Chapter 1: System Logging Overview The following examples illustrate how you can change the timestamp on log messages. Set the time zone to eastern daylight time (EDT), 5 hours behind UTC, and display the local time on the log messages. host1(config)#clock timezone EDT -5 Display UTC, but no time zone, on the log messages.
Page 40: Configuring Log Filters
JUNOSe 11.1.x System Event Logging Reference Guide Configuring Log Filters Many event categories contain filters so you can further refine the type of information that the system logs. For example, when logging BGP connections, you can limit the information logged to a specific access class, peer, route map, or virtual router. You define filters when you set the log severity for an event category.
Page 41: Turning Off Log Filters
Chapter 1: System Logging Overview <cr> host1(config)#log severity debug ppp pos 2/0 To obtain a list of the filters available in each event category, see “Event Categories” on page 23 . Turning Off Log Filters You can turn off filters in three ways: Turn off all filters Turn off all filters for an event category Turn off a specific filter...
Page 42 JUNOSe 11.1.x System Event Logging Reference Guide Use to show the logging configuration on your system. show log configuration Example 1 Factory defaults are set host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task no log severity category...
Page 43 Chapter 1: System Logging Overview Example 3 Log severity is set to alert host1#(config)#log severity alert host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task log severity ALERT category severity verbosity...
Page 44 JUNOSe 11.1.x System Event Logging Reference Guide * Default severity setting is overridden by the system-wide severity setting. * Default severity setting is overridden by the individual log severity setting. See show log configuration. Use to display system events. show log data Use keywords to select which events are displayed: category Limits the display to a single log event category.
Page 45 Chapter 1: System Logging Overview Example host1# show log data severity notice NOTICE 01/10/2001 00:59:50 os: config -- using running NOTICE 01/10/2001 00:59:52 os: srp application, build date: 0x3a437424 (FRI DEC 22 2000 15:32:52 UTC) NOTICE 01/10/2001 00:59:52 os: last reset: user reboot, reason: not specified NOTICE 01/10/2001 00:59:52 os: OsIsrRegistrar: 0xb NOTICE 01/10/2001 00:59:52 os: OsIsrRegistrar: 0xa NOTICE 01/10/2001 00:59:52 os: OsIsrRegistrar: 0x2...
Page 46 JUNOSe 11.1.x System Event Logging Reference Guide Monitoring Logging System Events...
Page 47: Chapter 2 Event Categories
Chapter 2 Event Categories This chapter lists each event category in the system software. To help you determine the severity level to set when troubleshooting, the log strategy for each event category is included. The log strategy shows the type of information logged for each severity level.
Page 48 JUNOSe 11.1.x System Event Logging Reference Guide...
Page 49: Event Categories
Part 2 Event Categories A Commands on page 27 B Commands on page 35 C Commands on page 51 D Commands on page 57 E Commands on page 79 F Commands on page 81 G and H Commands on page 87 I Commands on page 91 L Commands on page 129 M Commands on page 145...
Page 50 JUNOSe 11.1.x System Event Logging Reference Guide Event Categories...
Page 51: A Commands
Chapter 3 A Commands aaaAtm1483Cfg on page 27 aaaEngineGeneral on page 28 aaaQosCfg on page 28 aaaServerGeneral on page 29 aaaUserAccess on page 29 addressServerGeneral on page 30 ar1AaaServerGeneral on page 30 atm on page 31 atm1483 on page 32 atm1483VcClass on page 32 atmAal5 on page 33 atmVcClass on page 33...
Page 52: Aaaenginegeneral
JUNOSe 11.1.x System Event Logging Reference Guide Notification from AAA indicating that an ATM 1483 subinterface configuration is Debug available; ATM 1483 processing configuration received from AAA; unable to get ATM 1483 subinterface information; number of ATM 1483 configuration entries is out of range None Filter...
Page 53: Aaaservergeneral
Chapter 3: A Commands None Notice Log None Info AAA QoS configuration tracking Debug None Filter aaaServerGeneral AAA server general Description None Emergency None Alert None Critical Subscriber count exceeds license plus grace; internal attachment errors Error Subscriber count exceeds license; cannot grow internal memory pools; accounting Warning Log message failures;...
Page 54: Addressservergeneral
JUNOSe 11.1.x System Event Logging Reference Guide None Critical None Error None Warning Log None Notice Log User is granted or denied access Info None Debug None Filter addressServerGeneral Address server general Description None Emergency None Alert None Critical None Error Address server request failure (for example, configured address server is not available) Warning Log...
Page 55: Atm
Chapter 3: A Commands None Alert None Critical Internal (NVS) errors for limit configuration per interface Error None Warning Log None Notice Log None Info Interface information insufficient to identify the user’s interface location Debug None Filter ATM interface Description None Emergency None...
Page 56: Atm1483
JUNOSe 11.1.x System Event Logging Reference Guide None Filter atm1483 ATM 1483 data service Description None Emergency None Alert None Critical Error applying static map entry for a newly created circuit of an NBMA interface; Error unable to configure interfaces on ATM interface; unable to determine interface location for ATM AAL5 interface;...
Page 57: Atmaal5
Chapter 3: A Commands In routers with high availability enabled, failure to mirror the VC modification or Error failure to associate the VC modification with the standby SRP module Failure to find the PVCs associated with this VC class; failure to apply the VC class Warning Log attributes to the appropriate PVCs;...
Page 58: Auditipsec
JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Resource failure errors, such as error allocating memory for adding a VC class; internal Error software errors; error processing a VC class association; when using SNMP, unable to set a VC class state from not in service to in service, or vice-versa;...
Page 59: B Commands
Chapter 4 B Commands bfdAdaptivity on page 35 bfdEvents on page 36 bfdGeneral on page 36 bfdSession on page 37 bgpConnections on page 37 bgpDampening on page 38 bgpEvents on page 39 bgpGeneral on page 40 bgpGracefulRestart on page 41 bgpIpv6NextHops on page 42 bgpKeepAlives on page 42 bgpMessages on page 43...
Page 60: Bfdgeneral
JUNOSe 11.1.x System Event Logging Reference Guide None Error None Warning Log None Notice Log BFD session adaptivity events Info BFD session adaptivity events Debug None Filter bfdEvents BFD Events Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log...
Page 61: Bgpconnections
Chapter 4: B Commands None Critical None Error None Warning Log BFD enabled/disabled on an interface from a client Notice Log None Info None Debug None Filter bfdSession BFD session events Description None Emergency None Alert None Critical None Error Unknown BFD session Warning Log Session state changes...
Page 62: Bgpdampening
JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical Error setting password for specified peer; error binding to update-source address for Error specified peer TCP error occurred while receiving data Warning Log Outbound TCP connection initiated, completed, or failed; inbound TCP connection Notice Log accepted, refused, or failed;...
Page 63: Bgpevents
Chapter 4: B Commands None Error None Warning Log Route is suppressed by route-flap dampening; route is no longer suppressed by Notice Log route-flap dampening None Info None Debug access-class This filter is not currently supported Filter 1 peer See description of the bgpRoutes peer filter for information about this filter Filter 2 route-map This filter is not currently supported Filter 3...
Page 64: Bgpgeneral
JUNOSe 11.1.x System Event Logging Reference Guide None Debug access-class This filter is not currently supported Filter 1 peer See description of the bgpRoutes peer filter for information about this filter Filter 2 route-map This filter is not currently supported Filter 3 router See description of the bgpRoutes router filter for information about this filter Filter 4...
Page 65: Bgpgracefulrestart
Chapter 4: B Commands in This filter is not currently supported Filter 5 out This filter is not currently supported Filter 6 bgpGracefulRestart BGP Graceful Restart Feature log Description None Emergency None Alert None Critical None Error None Warning Log Log BGP performed or did not perform a graceful restart;...
Page 66: Bgpipv6Nexthops
JUNOSe 11.1.x System Event Logging Reference Guide bgpIpv6NextHops BGP indirect next-hops for IPv6 NLRI Description None Emergency None Alert None Critical Errors in BGP IPv6 next hop events and state transitions Error None Warning Log State transitions of BGP IPv6 next hops Notice Log None Info...
Page 67 Chapter 4: B Commands None Debug access-class This filter is not currently supported Filter 1 peer See description of the bgpRoutes peer filter for information about this filter Filter 2 route-map This filter is not currently supported Filter 3 router See description of the bgpRoutes router filter for information about this filter Filter 4 in Matches on traffic coming into the router Filter 5...
Page 68: Bgpneighborchanges
JUNOSe 11.1.x System Event Logging Reference Guide NOTE: Send messages are logged to the bgpMessages log when a message is added to the send queue. A debug message is logged to the bgpConnections log when the message is actually passed to TCP. access-class This filter is not currently supported Filter 1 peer See description of the bgpRoutes peer filter for information about this filter...
Page 69: Bgpnexthops
Chapter 4: B Commands router See description of the bgpRoutes router filter for information about this filter Filter 4 in This filter is not currently supported Filter 5 out This filter is not currently supported Filter 6 bgpNextHops VPN and non-VPN BGP indirect next hops Description None Emergency...
Page 70 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error Failure to add, remove, or modify BGP route in IP forwarding table Warning Log BGP route added to, removed from, or modified in the IP forwarding table; aggregate Notice Log route added to, removed from, or modified in Loc-RIB;...
Page 71 Chapter 4: B Commands peer peerIpAddress | peerIpv6Address Filter 2 [ access-class accessClassName accessClassOptions | route-map routeMapName routeMapOptions | filtering-router filteringRouterName filteringRouterOptions | in | out ] peer Logs events for traffic that matches a specific peer peerIpAddress IP address of the peer for which you want to log events peerIpv6Address IPv6 address of the peer for which you want to log events access-class Logs events for traffic that matches a specific access class accessClassName Name of the access class for which you want to log events...
Page 72: Bridge
JUNOSe 11.1.x System Event Logging Reference Guide router Logs events for traffic on a specific virtual router virtualRouterName Name of virtual router access-class Logs events for traffic that matches a specific access class on the specified router accessClassName Name of the access class for which you want to log events accessClassOptions In the following format route-map routeMapName routeMapOptions | virtual-router virtualRouterName virtualRouterOptions | in | route-map Logs events for traffic that matches a specific route map...
Page 73: Bridgeengine
Chapter 4: B Commands Bridge resources (maximum interfaces, memory exhaustion) Warning Log Bridge group interface location availability, operation status, and MTU changes Notice Log Bridge group state changes (start, shutdown); bridge interface, learning, aging, and Info static MAC address modifications Verbose bridge interface, learning, aging, and static MAC address configuration and Debug status...
Page 74: Bulkstats
JUNOSe 11.1.x System Event Logging Reference Guide None Critical Bridge mode, bridge group, and subscriber policy errors Error Bridging manager resources (maximum bridge groups, maximum subscriber policies, Warning Log memory exhaustion) None Notice Log Bridging manager operation state changes (init, start, shutdown); bridge mode, bridge Info group, and subscriber policy modifications Verbose bridge mode, bridge group, and subscriber policy configuration and status...
Page 75: C Commands
Chapter 5 C Commands cacGeneral on page 51 cacIntf on page 52 cliCommand on page 52 cliGeneral on page 53 connectionManager on page 53 cops on page 54 copsPr on page 54 coreDump on page 55 ctreeLog on page 56 cacGeneral CAC general purpose Description...
Page 76: Cacintf
JUNOSe 11.1.x System Event Logging Reference Guide cacIntf CAC interface events Description None Emergency None Alert None Critical None Error Unusual or failure situations in interface processing Warning Log None Notice Log None Info Interface level debugging info Debug interface interfaceType interfaceSpecifier Filter interface Logs events for a specific interface interfaceType Type of interface on which you want to log events...
Page 77: Cligeneral
Chapter 5: C Commands None Warning Log All successful CLI configuration commands Notice Log All unsuccessful CLI configuration commands; all nonconfiguration commands Info None Debug None Filter cliGeneral CLI general log Description None Emergency None Alert None Critical None Error CLI command mode from prior release no longer exists;...
Page 78: Cops
JUNOSe 11.1.x System Event Logging Reference Guide 10G and 5G SRP modules only That there is not enough bandwidth for a particular Error board in the system, that connections could not be added in the fabric due to resource limitations (such as memory), that a board was just removed and the resource will not be needed when this condition is detected momentarily, or that a connection cannot be closed or a multicast destination cannot be dropped.
Page 79: Coredump
Chapter 5: C Commands None Emergency None Alert None Critical Error decoding COPS-PR messages received from the SDX program Error Outstanding COPS-PR pool allocations while attempting to shut down SSC client; Warning Log temporary resource allocations while sending COPS-PR messages to SDX program None Notice Log None...
Page 80: Ctreelog
JUNOSe 11.1.x System Event Logging Reference Guide ctreeLog For internal maintenance of IP routes Description None Emergency None Alert None Critical Failure in insertion, deletion, and update of IP routes in internal data structure used Error to maintain the routes None Warning Log None...
Page 81: Chapter 6 D Commands
Chapter 6 D Commands dcm on page 58 dcmEngineGeneral on page 58 debounceEvents on page 59 debounceGeneral on page 59 dhcpCapture on page 60 dhcpExternal on page 60 dhcpExternalEngine on page 61 dhcpGeneral on page 61 dhcpIssuLog on page 62 dhcpLocalClients on page 63 dhcpLocalGeneral on page 63 dhcpLocalHighAvailability on page 64...
Page 82 JUNOSe 11.1.x System Event Logging Reference Guide dvmrpMcastTable on page 75 dvmrpProbeRcv on page 75 dvmrpProbeSent on page 76 dvmrpRtTable on page 76 Dynamic Configuration Manager Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Schedule engine event;...
Page 83 Chapter 6: D Commands None Notice Log None Info Giving notify credits to line module; receipt of request buffer from line module; Debug starting line module communication session; Ack/Nack dynamic interface creation request None Filter debounceEvents Events causing changes to the upper-layer link status based on Ethernet debounce Description configuration None...
Page 84 JUNOSe 11.1.x System Event Logging Reference Guide Error in enabling or disabling the debounce timer on the Ethernet interface Error None Warning Log Debounce timer enabled or disabled on the Ethernet interface Notice Log None Info None Debug None Filter dhcpCapture DHCP packet capture Description...
Page 85 Chapter 6: D Commands None Critical Configuration errors; client processing errors (invalid data) Error Client processing errors (resource exhaustion) Warning Log Configuration changes Notice Log None Info Configuration change details; client events Debug None Filter dhcpExternalEngine DHCP external engine Description None Emergency None...
Page 86 JUNOSe 11.1.x System Event Logging Reference Guide Rvn8 Alert None Critical None Error None Warning Log None Notice Log None Info DHCP message received Debug None Filter dhcpIssuLog DHCP ISSU information Description None Emergency None Alert None Critical Error recreating DHCP ISSU IC shadow and its data structures, followed by an ISSU Error halt Buffering capacity exceeded between DHCP engine and the driver/ISSU shadow...
Page 87 Chapter 6: D Commands dhcpLocalClients DHCP local server clients Description None Emergency None Alert None Critical Cannot find the client’s interface; cannot find the client to expire the lease or remove Error it from the database; trying to expire client’s lease or remove it from database with bad IP address;...
Page 88 JUNOSe 11.1.x System Event Logging Reference Guide DHCP local server not configured; client’s session failed to start Notice Log Client per-interface limit exceeded; client per-interface exceeded condition abated Info Any log message that indicates the status of the general operation of the DHCP local Debug server;...
Page 89 Chapter 6: D Commands Local pool IP address is exhausted (address limit violation) Alert Higher limit of address pool utilization reached Critical None Error Lower limit of address pool utilization reached; invalid DHCP local address pool Warning Log attributes None Notice Log None Info...
Page 90 JUNOSe 11.1.x System Event Logging Reference Guide interface Logs events for a specific interface interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 91 Chapter 6: D Commands Failure to send a DHCP message to a client Warning Log Failure to restore client after reboot or interface change; failure to allocate memory Notice Log from task-controlled pools None Info Status of task and DHCP operations Debug None Filter...
Page 92 JUNOSe 11.1.x System Event Logging Reference Guide None Error None Warning Log Warm start recovery problems (high availability and unified ISSU) Notice Log None Info Control flow and key events, packets that are transmitted using the layer 2 unicast Debug feature, status and changes to DHCP relay agent information option and suboptions None Filter...
Page 93 Chapter 6: D Commands None Alert None Critical Problems communicating with IPv6; invalid message types received; out-of-memory Error conditions; serious DHCPv6 protocol state errors; internal errors Minor DHCPv6 protocol errors Warning Log None Notice Log None Info None Debug None Filter dhcpv6DemuxGeneral DHCPv6 packet demultiplexer events...
Page 94 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Failure to create server (bad router or out of memory) Error Attempt to remove a nonexistent server Warning Log Failure to create server (IPv6 not licensed); cold/warm restart of DHCPv6 local server; Notice Log before/after restoring client bindings;...
Page 95 Chapter 6: D Commands dnsGeneralLog DNS general Description None Emergency None Alert None Critical None Error Failure to post a message to DNS about the query response from DNS server Warning Log None Notice Log None Info Dump DNS response packet; trace DNS query submission; trace DNS response parsing Debug and processing;...
Page 96 JUNOSe 11.1.x System Event Logging Reference Guide Suspicious control flow deleted Info None Debug None Filter DS1 layer Description None Emergency None Alert None Critical None Error Interface creation or binding failure Warning Log Failure to bring line module application online; dropped interface state change Notice Log notification due to lack of resources;...
Page 97 Chapter 6: D Commands Failure to bring line module application online; dropped interface state change Notice Log notification due to lack of resources; discarded stale line module notification Dropped interface state change notification for unknown or removed interface Info None Debug None Filter...
Page 98 JUNOSe 11.1.x System Event Logging Reference Guide NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter 2 router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events interface Logs events on a specific interface on the virtual router interfaceType Type of interface for which you want to log events...
Page 99 Chapter 6: D Commands dvmrpMcastTable DVMRP multicast table messages Description None Emergency None Alert None Critical Error removing MulticastEntry; adding duplicate MulticastEntry; adding nonexistent Error MulticastEntry; attempting to send prune to nonexistent neighbor; error deleting MulticastEntry; error adding outgoing interfaces Deleting MulticastEntry with no SG state found;...
Page 100 JUNOSe 11.1.x System Event Logging Reference Guide procProbe new neighbor Notice Log None Info Processing probe (verified has our address in packet); display probe Debug interface See description of the dvmrpGeneral interface filter for information about Filter 1 this filter router See description of the dvmrpGeneral router filter for information about this Filter 2 filter...
Page 101 Chapter 6: D Commands None Alert None Critical Route error; router report error; error replacing route after applying accept filter; Error internal errors Unable to create new route; deleting routing table Warning Log Error in report packet; adding or replacing local route; ignoring poison on upstream Notice Log user interface (USIF);...
Page 102 JUNOSe 11.1.x System Event Logging Reference Guide dvmrpRtTable...
Page 103: Chapter 7 E Commands
Chapter 7 E Commands ethernet on page 79 ethernetStateSession on page 79 ethernet Ethernet layer Description None Emergency None Alert None Critical None Error Cannot configure Ethernet interface successfully; memory pool depleted Warning Log No pool space; can bring interface up Notice Log Hardware present or not present notification Info...
Page 104 JUNOSe 11.1.x System Event Logging Reference Guide None Critical Configuration errors for duplex mode and speed settings on the Fast Ethernet Error management port Configuration did not occur for duplex mode and speed on the Fast Ethernet Warning Log management port None Notice Log None...
Page 105: Chapter 8 F Commands
Chapter 8 F Commands fileSystem on page 81 flowInspection on page 82 flowInspectionEngine on page 82 flowServicesFirewallAlert on page 83 flowServicesFirewallAudit on page 83 frameRelay on page 84 fsAgent on page 84 ft1 on page 85 ftpClient on page 85 ftpServer on page 86 fileSystem File system...
Page 106 JUNOSe 11.1.x System Event Logging Reference Guide flowInspection Flow inspection Description None Emergency None Alert None Critical Configuration error for bulk static translations; failure to increase size of translation Error database; pool range overlap; more DNS queries than can be processed Translation timeout change not applied to existing translations;...
Page 107 Chapter 8: F Commands Engine creation, timer state information, setCoreLocation notification Debug None Filter flowServicesFirewallAlert Firewall Description None Emergency None Alert None Critical No resources; number of connections has exceeded the specified limit; destination Error host is blocked or cleared; NAT disallows a connection; no controlling list; bad packet received None Warning Log...
Page 108: Framerelay
JUNOSe 11.1.x System Event Logging Reference Guide Transition from half-open to fully complete connection; transition to half-open Notice Log connection None Info None Debug None Filter frameRelay Frame Relay layer Description None Emergency None Alert Failure to bring up the application due to lack of memory resources Critical Summary information about automatic removal of interface or circuit from nonvolatile Error...
Page 109: Ft1
Chapter 8: F Commands Previous file system sync failed booting protected images Critical File system unavailable Error File transfer initialization failure; unexpected software error Warning Log None Notice Log File transfer notification; platform or release mismatch; file transfer error; release Info file is corrupt;...
Page 110: Ftpserver
JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Unexpected results during a transfer Error None Warning Log Completion status of a network connection command (example: “ Succeeded creating Notice Log data socket” ) Completion status of a user command (example: “ lS command succeeded” ) Info None Debug...
Page 111: Gplaan
Chapter 9 G and H Commands gplaan on page 87 ha on page 87 hdlc on page 88 hotfixGeneral on page 89 httpServer on page 89 gplaan General purpose locally allocated address notifier Description None Emergency None Alert None Critical Out of resources Error None...
Page 112: Hdlc
JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Accessing redundancy mode is not supported on the standby SRP; changing Error redundancy mode is not supported on the standby SRP; high availability disabled due to state error High availability disabled due to incompatible release on standby;...
Page 113: Hotfixgeneral
Chapter 9: G and H Commands None Filter hotfixGeneral Hotfix general Description None Emergency None Alert None Critical Error conditions causing startup hotfix activation to fail Error Failed to deactivate or disarm a hotfix; attempts to activate incompatible hotfixes Warning Log Activation or arming of a hotfix Notice Log None...
Page 114 JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log Start or stop HTTP process; create or remove httpd; growing a pool of httpds; enable Info or disable httpd; growing a pool of HTTP connections (httpcs); failure to perform TCP socket accept;...
Page 115: I Commands
Chapter 10 I Commands icImageFixServer on page 92 icmpTraffic on page 93 icmpv6Traffic on page 94 icrPartitionManager on page 95 igmpGeneral on page 95 igmpGracefulRestart on page 96 igmpGroupState on page 97 ikeCertificateMgr on page 98 ikeEnrollment on page 98 ikepki on page 99 interModuleCommunication on page 99 ipAccessList on page 100...
Page 116 JUNOSe 11.1.x System Event Logging Reference Guide ipv6General on page 111 ipv6Interface on page 112 ipv6ProfileMgr on page 113 ipv6RouteTable on page 113 ipv6Traffic on page 114 ipv6Types on page 115 isisAdjChange on page 115 isisAdjPackets on page 116 isisBfdEvents on page 117 isisChecksumErr on page 117 isisGeneral on page 118 isisHelloGeneral on page 119...
Page 117 Chapter 10: I Commands Memory allocation failure; ImageFix load failure; manual ImageFix activation failure; Error ImageFix file errors Buffer allocation failure; unexpected status received in state X Warning Log Application image up, startup ImageFixes activated; reversion from FC ImageFix to Notice Log release FC image requires reload of line module;...
Page 118 JUNOSe 11.1.x System Event Logging Reference Guide router Logs events on a specific virtual router virtualRouterName Name of virtual router for which you want to log events remote-ip-address Logs events for a remote address ipAddress Address of remote system for which you want to log messages ipAddressMask Mask for the remote address icmpv6Traffic ICMPv6 frame transmit or receive...
Page 119 Chapter 10: I Commands icrPartitionManager Interchassis Redundancy Partition Manager Description None Emergency None Alert None Critical Errors allocating memory for any ICR activity; Error adding, configuring, removing Error ICR partitions and other errors during ICR transition. None Warning Log Delay in changing the state of the ICR partition; Unable to change the state of the Notice Log ICR partition because of RADIUS access issues.
Page 120 JUNOSe 11.1.x System Event Logging Reference Guide None Info IGMP interface or group state change; errors in packet transmit or receive Debug interface interfaceType interfaceSpecifier Filter 1 interface Logs events for a specific interface interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 121 Chapter 10: I Commands None Info None Debug None Filter igmpGroupState IGMP group state change events Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log igmp v2 first host join, last host leave events (Release 5.0 and earlier); igmp v3 state Info change and source-list change events aggregated across all hosts on the interface (Release 5.1.0 and later)
Page 122 JUNOSe 11.1.x System Event Logging Reference Guide ikeCertificateMgr Displays events relating to ERX key generation, certificate status, and certificate Description processing None Emergency None Alert None Critical Initialization problems Error Missing ERX private key; public key does not match private key; certificate expired; Warning Log memory allocation problems;...
Page 123: Ikepki
Chapter 10: I Commands Received CA certificate; received CA and RA certificate chain; received ERX certificate; Info retry scep poll message Found CA certificate; found ERX certificates; enrollment failure details Debug None Filter ikepki IKE SA negotiation Description None Emergency None Alert None...
Page 124: Ipaccesslist
JUNOSe 11.1.x System Event Logging Reference Guide None Error Line module recovery attempts after monitoring thresholds exceeded Warning Log Ping monitoring threshold exceeded; ICC session monitoring threshold exceeded; Notice Log ICC connection monitoring threshold exceeded Intermodule communication monitoring condition, state change, and corresponding Info action None...
Page 125: Ipengine
Chapter 10: I Commands accessList Logs a match on any access-list entry router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events access-list Logs events for a specific access list accessListName Name of access list for which you want to log events access-element-id Logs events for a specific element ID idNumber Element ID number for which you want to log events;...
Page 126: Ipflowstatsengine
JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical None Error None Warning Log Application starting Notice Log Interfaces become available or unavailable Info Main and History cache tables are cleared Debug None Filter ipflowstatsEngine J-Flow statistics engine Description None Emergency...
Page 127 Chapter 10: I Commands None Emergency None Alert (IP) Interface stacking management errors Critical (ARP) Allocation of Ethernet next hop failed Error (IP) Not able to create interface or create address on null 0 interface; undefined IP status code; interface stacking management errors; send and forward failures because of not finding corresponding egress or ingress nodes;...
Page 128: Ipifcreator
JUNOSe 11.1.x System Event Logging Reference Guide ipIfCreator IP interface creator events Description None Emergency None Alert None Critical Out of resources failures in midoperation; client application and DCM interaction Error errors (out-of-range sessionId or enum; unrecognized message type); failure during client callback for interface creation Client session already unbound;...
Page 129: Ipnhoptrackergeneral
Chapter 10: I Commands None Notice Log None Info Interface state transitions and deletions; interface state machine events Debug interface See description of the ipGeneral interface filter for information about this Filter 1 filter router See description of the ipGeneral router filter for information about this filter Filter 2 ipNhopTrackerGeneral Next-hop tracker for IP shared interfaces...
Page 130: Iproutepolicy
JUNOSe 11.1.x System Event Logging Reference Guide Failure to create or delete dynamic IP interfaces Error None Warning Log None Notice Log None Info Events related to dynamic IP interface creation or deletion; assignment or Debug unassignment of profiles to interfaces None Filter ipRoutePolicy...
Page 131: Iproutetable
Chapter 10: I Commands ipRouteTable IP routing table Description None Emergency None Alert None Critical Next-hop resolution-related problems; exceeding maximum route limit or warning Error threshold Failure to add route Warning Log None Notice Log In process of finding best route information Info Normal routing table updates;...
Page 132: Ipsecp1Throttler
JUNOSe 11.1.x System Event Logging Reference Guide Adding entries to database Info Detailed database information and transactions Debug None Filter ipsecP1Throttler Ongoing phase 1 negotiations Description None Emergency None Alert None Critical None Error Throttling instances based on suspicious flows (for example, the same peer failing Warning Log repeated fast negotiations) None...
Page 133: Ipsubscribermgr
Chapter 10: I Commands Significant state changes Notice Log None Info None Debug None Filter ipSubscriberMgr IP Subscriber Manager Description None Emergency None Alert None Critical Primary interface not found Error None Warning Log None Notice Log None Info Dump parameters for methods; dump results for lookups; dump points during thread Debug execution.
Page 134: Iptunnel
JUNOSe 11.1.x System Event Logging Reference Guide Data errors detected in frames Warning Log Dropped frames No error Notice Log None Info Normal data events Debug interface See description of the ipGeneral interface filter for information about this Filter 1 filter router See description of the ipGeneral router filter for information about this filter Filter 2...
Page 135: Ipv6General
Chapter 10: I Commands None Critical None Error None Warning Log None Notice Log Access list rule has been matched Info None Debug accessList Filter 1 accessList Logs a match on any access-list entry for all IPv6 access lists accessList router virtualRouterName access-list accessListName access-element-id Filter 2 idNumber accessList Logs a match on any access-list entry...
Page 136: Ipv6Interface
JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log None Info None Debug interface interfaceType interfaceSpecifier Filter 1 interface Logs events for a specific interface interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 137: Ipv6Profilemgr
Chapter 10: I Commands Interface configuration errors; errors in pointing interface to another interface; Warning Log interface LocalAddress-related errors None Notice Log None Info Interface state transitions Debug interface See description of the ipv6General interface filter for information about Filter 1 this filter router See description of the ipv6General router filter for information about this Filter 2...
Page 138: Ipv6Traffic
JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical Next-hop resolution-related problems; exceeding maximum route limit or warning Error threshold; route add and delete errors Route limit–related warnings Warning Log Route limit–related messages Notice Log None Info Normal routing table updates; next-hop resolution for static routes; redistribution Debug events;...
Page 139: Ipv6Types
Chapter 10: I Commands router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events [ address ipv6Address ] Filter 2 address Logs events for packets arriving from or going to a specified IPv6 address ipv6Address IPv6 address of remote system for which you want to log messages ipv6Types...
Page 140: Isisadjpackets
JUNOSe 11.1.x System Event Logging Reference Guide None Error None Warning Log Adjacency state change Notice Log None Info None Debug interface interfaceType interfaceSpecifier Filter 1 interface Logs events for a specific interface interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 141: Isisbfdevents
Chapter 10: I Commands None Error Error in sent IIH or received IIH Warning Log Sent or received IIH, DR election Notice Log Authentication failed Info Detailed information about IIH Debug interface See description of the isisAdjChange interface filter for information about Filter 1 this filter router See description of the isisAdjChange router filter for information about this...
Page 142: Isisgeneral
JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical None Error LSP checksum error Warning Log None Notice Log None Info None Debug interface See description of the isisAdjChange interface filter for information about Filter 1 this filter router See description of the isisAdjChange router filter for information about this Filter 2 filter...
Page 143: Isishellogeneral
Chapter 10: I Commands router See description of the isisAdjChange router filter for information about this Filter 2 filter isisHelloGeneral IS-IS system notifications Description None Emergency None Alert None Critical Memory failure and other fatal errors Error Communication failure between IS-IS and IS-IS hello Warning Log None Notice Log...
Page 144: Isisipv6Log
JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log Hello packets sent and received Info Dumping hello packet in detail Debug interface See description of the isisAdjChange interface filter for information about Filter 1 this filter router See description of the isisAdjChange router filter for information about this Filter 2 filter isisIpv6Log...
Page 145: Isislocalupdate
Chapter 10: I Commands None Emergency None Alert None Critical Failure to communicate with LDP and out of memory conditions Error None Warning Log None Notice Log None Info LDP interactions Debug None Filter isisLocalUpdate IS-IS local LSP packets Description None Emergency None...
Page 146: Isismplsteadvertisements
JUNOSe 11.1.x System Event Logging Reference Guide isisMplsTeAdvertisements IS-IS MPLS traffic engineering advertisements Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Resource information changes Debug None Filter isisMplsTeEvents IS-IS MPLS traffic engineering Description None Emergency...
Page 147: Isisnsfevents
Chapter 10: I Commands None Filter isisNsfEvents Log events related to IS-IS non-stop forwarding procedure during system warm start Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Logs IS-IS NSF timer related events (for example, expiration and cancellation of Info timers [T1, T2, T3]) Restart-request transmit;...
Page 148: Isissnppackets
JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log None Info None Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events isisSnpPackets IS-IS complete sequence numbers PDU (CSNP) and partial sequence numbers PDU Description (PSNP) packets None...
Page 149: Isisspfstatistics
Chapter 10: I Commands None Alert None Critical None Error None Warning Log Start or suspend SPF; updating routing table Notice Log Add tent or path; process LSP Info Add route Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events isisSpfStatistics IS-IS SPF timing and statistic data...
Page 150: Isisspftriggers
JUNOSe 11.1.x System Event Logging Reference Guide isisSpfTriggers IS-IS SPF triggering Description None Emergency None Alert None Critical None Error None Warning Log SPF trigger event Notice Log None Info None Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events isisUpdatePackets IS-IS LSP packets sent or received...
Page 151: Isvoice
Chapter 10: I Commands Set or cleared SRM flags; building LSP Debug interface See description of the isisAdjChange interface filter for information about Filter 1 this filter router See description of the isisAdjChange router filter for information about this Filter 2 filter isVoice IS Voice application...
Page 152 JUNOSe 11.1.x System Event Logging Reference Guide Recoverable IPSec transport interface–related configuration and operational error Warning Log IPSec transport interface state change Notice Log IPSec transport interface interaction with IKE protocol; interface pool usage Info Details about the interaction between the IPSec transport interface and the IKE Debug protocol;...
Page 153: Chapter 11 L Commands
Chapter 11 L Commands l2cGeneral on page 130 l2cKeepAlive on page 130 l2cPacket on page 131 l2tp on page 131 l2tpDialoutGenerator on page 132 l2tpDisconnectCause on page 132 l2tpIpLowerBinding on page 133 l2tpStateMachine on page 133 lasv6General on page 134 ldpConnect on page 134 ldpGeneral on page 135 ldpGracefulRestart on page 135...
Page 154 JUNOSe 11.1.x System Event Logging Reference Guide l2cGeneral Layer 2 Control application general Description None Emergency None Alert None Critical Signal protocol failures, out of resources errors Error Signal unexpected but recoverable socket conditions Warning Log None Notice Log None Info Neighbor, socket events Debug...
Page 155 Chapter 11: L Commands None Filter l2cPacket Layer 2 Control protocol packets Description None Emergency None Alert None Critical None Error Signal recoverable, unexpected packet processing failures Warning Log None Notice Log None Info Protocol packet exchange Debug None Filter l2tp Layer 2 Tunneling Protocol Description...
Page 156 JUNOSe 11.1.x System Event Logging Reference Guide Detailed debugging information Debug None Filter l2tpDialoutGenerator L2TP dial-out Description None Emergency None Alert None Critical Internal software consistency errors; dial-out service denial because of insufficient Error resources; dial-out session failure Dial-out NVS consistency errors; restrictions on maximum simultaneous dial-out Warning Log components None...
Page 157: L Commands
Chapter 11: L Commands Disconnect error code information generated at LAC Info None Debug None Filter l2tpIpLowerBinding Lower binding for L2TP and IP Description None Emergency None Alert None Critical Virtual router does not have a configured router ID; virtual router has a null router Error None Warning Log...
Page 158 JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log None Info State machine trace Debug None Filter lasv6General IPv6 local address pool details Description None Emergency None Alert None Critical Error in configuration of the command for IPv6 local address pool or runtime errors, Error if any, that occur None...
Page 159 Chapter 11: L Commands None Warning Log LDP connection creation and deletion information Notice Log None Info None Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events ldpGeneral Label Distribution Protocol general events Description...
Page 160 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error None Warning Log LDP Neighbor Graceful Restart state changes Notice Log LDP Graceful Restart timer operation Info LDP Graceful Restart debug message Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events...
Page 161 Chapter 11: L Commands virtualRouterName Name of virtual router for which you want to log events ldpHelloMgr Displays details about the task dedicated for sending LDP hellos, the LDP hello Description manager None Emergency None Alert None Critical Memory allocation failure Error None Warning Log...
Page 162 JUNOSe 11.1.x System Event Logging Reference Guide Interface up and interface down events Notice Log None Info Event with detailed interface parameters for normal operation Debug router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events interface Logs events on a specific interface on the virtual router interfaceType Type of interface for which you want to log events...
Page 163 Chapter 11: L Commands ldpPeer LDP peer events Description None Emergency None Alert None Critical LDP neighbor authentication setting failure Error None Warning Log LDP neighbor authentication transaction Notice Log None Info LDP peer maintenance transaction Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events ldpShimInterface...
Page 164 JUNOSe 11.1.x System Event Logging Reference Guide None Debug router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events interface Logs events on a specific interface on the virtual router interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and...
Page 165 Chapter 11: L Commands ldpTimer Displays details about LDP timer events; when a timer expires or is scheduled Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Timer event information Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events...
Page 166 JUNOSe 11.1.x System Event Logging Reference Guide VPLS debug information Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events ldpWorker Displays details about the background LDP jobs (LDP worker events) Description None Emergency...
Page 167 Chapter 11: L Commands Attempts to set a local pool group name; attempts to restore an overlapping address Warning Log range from a previous version of the software Attempts to allocate an address from the backup local address pool group name Notice Log because all the addresses in the primary local address pool group have been already allocated.
Page 168 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error Connection granted: no secrets are configured Warning Log None Notice Log None Info Authentication attempted; no memory for protocol message; connection granted: Debug correct password; connection denied: incorrect password None Filter localLinePassword...
Page 169: Chapter 12 M Commands
Chapter 12 M Commands macroData on page 146 macroSchedular on page 146 mgtmGeneral on page 147 mgtmGracefulRestart on page 148 mgtmv6General on page 148 mgtmv6GracefulRestart on page 149 mldGeneral on page 150 mldGracefulRestart on page 151 mldGroupState on page 151 mmcd on page 152 mobileIpv4HaBinding on page 153 mobileIpv4HaEng on page 153...
Page 170 JUNOSe 11.1.x System Event Logging Reference Guide macroData Macro information Description None Emergency None Alert None Critical Error while running the macro Error None Warning Log Data from env.setResults Notice Log None Info None Debug None Filter macroSchedular Macro information Description None Emergency...
Page 171 Chapter 12: M Commands None Filter mgtmGeneral IP multicast group table manager general information Description None Emergency None Alert None Critical Major errors in MGTM API calls resulting in failure Error IP Multicast fastpath forwarding not supported on interface Warning Log Errors in MGTM API calls Notice Log State change events;...
Page 172 JUNOSe 11.1.x System Event Logging Reference Guide NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. mgtmGracefulRestart MGTM graceful restart Description None Emergency None Alert None Critical None Error None Warning Log Multicast graceful restart complete Notice Log None...
Page 173 Chapter 12: M Commands State change events; invalid parameters in API calls Info (Source, Group) entries not found Debug interface interfaceType interfaceSpecifier Filter 1 interface Logs events for a specific interface interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 174 JUNOSe 11.1.x System Event Logging Reference Guide None Info IGMP, PIM, IP route table multicast graceful restart complete Debug None Filter mldGeneral Multicast Listener Discovery (MLD) general Description None Emergency None Alert None Critical Nonrecoverable errors Error NVS errors Warning Log Errors while configuring or learning groups Notice Log None...
Page 175 Chapter 12: M Commands interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. mldGracefulRestart MLD graceful restart Description...
Page 176 JUNOSe 11.1.x System Event Logging Reference Guide None Warning Log None Notice Log MLDv1 first host join, last host done events; MLDv2 state change and source-list Info change events aggregated across all hosts on the interface None Debug router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of the virtual router for which you want to log events...
Page 177 Chapter 12: M Commands None Filter mobileIpv4HaBinding Mobile IPv4 home agent binding Description None Emergency None Alert None Critical Registration request (RRQ) from foreign agent is prohibited by host access control Error list (ACL) None Warning Log None Notice Log None Info Mobile IP timer started for n seconds, where n is the number of seconds...
Page 178 JUNOSe 11.1.x System Event Logging Reference Guide Verifying replay attack Debug None Filter mobileIpv4HaEvent Mobile IPv4 home agent events Description None Emergency None Alert None Critical Authentication check failed Error None Warning Log None Notice Log None Info Authentication check succeeded Debug None Filter...
Page 179 Chapter 12: M Commands Home agent activated in virtual router Info Authentication, authorization, and accounting (AAA) granted Debug None Filter mplsFwdTable MPLS fowarding table events Description None Emergency None Alert None Critical Nonfatal internal errors Error Minor nonfatal internal errors Warning Log None Notice Log...
Page 180 JUNOSe 11.1.x System Event Logging Reference Guide Major interface deletion; minor internal errors Warning Log None Notice Log NVS operations Info NVS operations; timer operations; minor interface label stacking; function flows; Debug L2VPN instance created, destroyed router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events mplsHighAvailability MPLS high availability events...
Page 181 Chapter 12: M Commands None Alert None Critical Signaling protocol interaction failures; major interface engine interaction failures; Error major interface finite state machine bad state transitions; major interface configuration errors; LSM interface label space interaction failures None Warning Log None Notice Log None Info...
Page 182 JUNOSe 11.1.x System Event Logging Reference Guide None Warning Log None Notice Log None Info Minor interface to engine transactions; minor interface to IP transactions; minor Debug interface configuration transactions; signaling protocol LSP setup or teardown transactions; minor interface finite state machine transitions interface interfaceType interfaceSpecifier Filter 1 interface Logs events for a specific interface...
Page 183 Chapter 12: M Commands Configuration changes for per-VR attributes; dynamic interface creation events Debug None Filter mplsShimInterface MPLS Shim Interface events Description None Emergency None Alert None Critical Signaling protocol interaction failures; shim interface engine interaction failures; Error shim interface finite state machine bad state transitions; shim interface configuration errors None Warning Log...
Page 184 JUNOSe 11.1.x System Event Logging Reference Guide mplsTraffic Logging for MPLS slow-path, ping, and trace packets; MPLS packets exceptioned to Description the SRP module for any reason None Emergency None Alert None Critical None Error MPLS packets discarded on transmit or receive for any reason Warning Log None Notice Log...
Page 185 Chapter 12: M Commands Trace application startup/shutdown/operation Debug None Filter mrInfoRcvdLog Multicast router received information Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Number of trace packets received Info Hexidecimal dump of packets received Debug None Filter...
Page 186 JUNOSe 11.1.x System Event Logging Reference Guide Number of trace packets sent Info Hexidecimal dump of packets sent Debug None Filter mtraceLog General Mtrace server information Description None Emergency None Alert None Critical Error creating or deleting Mtrace server; error communicating with other modules; Error allocation failures None...
Page 187 Chapter 12: M Commands None Notice Log Short description of the received mtrace packets Info Complete print of the received mtrace packets Debug None Filter mtraceSentLog mtrace packets sent Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Short description of the mtrace packets sent...
Page 188 JUNOSe 11.1.x System Event Logging Reference Guide None Warning Log None Notice Log None Info IP multicast packet transmit or receive information Debug remote-ip-address ipAddress [ ipAddressMask ] Filter 1 remote-ip-address Logs events for a remote address ipAddress Address of remote system for which you want to log messages ipAddressMask Mask for the remote address router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ] Filter 2...
Page 189: Chapter 13 N Commands
Chapter 13 N Commands nameResolverLog on page 165 nfsClient on page 165 noneAaaAddrServer on page 166 noneAaaServer on page 167 ntpGeneral on page 167 nameResolverLog Name resolver table Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Name lookup failures...
Page 190 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Error installing NFS driver; error mounting or unmounting remote file system with Error specific error indication (if known); error accessing file on remote file system Attempting to reuse already used local mount point when mounting remote file Warning Log system;...
Page 191 Chapter 13: N Commands noneAaaServer Authentication and accounting client Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Notification of automatic success response to authentication or accounting request Debug None Filter ntpGeneral Network Time Protocol (NTP) system notifications Description None...
Page 192 JUNOSe 11.1.x System Event Logging Reference Guide None Debug router ID Filter ntpGeneral...
Page 193: Chapter 14 O Commands
Chapter 14 O Commands oam3ahAssociations on page 170 oam3ahEvents on page 170 oam3ahPdus on page 171 os on page 171 ospfElectDr on page 172 ospfGeneral on page 173 ospfHelloPktsRcvd on page 174 ospfHelloPktsSent on page 175 ospfInterface on page 176 ospfLdpEvents on page 176 ospfLsa on page 177 ospfNeighbor on page 178...
Page 194 JUNOSe 11.1.x System Event Logging Reference Guide ospfv3PktsSent on page 190 ospfv3Route on page 190 ospfV3SpfExt on page 191 ospfV3SpfInter on page 192 ospfV3SpfIntra on page 192 oam3ahAssociations 802.3ah OAM association details for link-fault management between a local and Description remote OAM peer None Emergency...
Page 195 Chapter 14: O Commands Link is disabled because the high threshold for an error is exceeded on the Ethernet Error OAM interface or because of the error-disable action specified to be performed in response to an OAM PDU received from a remote peer for a fault in the receive path of the link None Warning Log...
Page 196 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency Fatal software error notification (assertions, panics, exceptions); panic timer Alert expiration; ECC memory errors System halt; NVS reverting to factory defaults Critical File system errors; image checksum failure; POST test failure; unexpected software Error error;...
Page 197: Ospfgeneral
Chapter 14: O Commands DR election events Notice Log None Info None Debug interface-ip-address [ ip-address ipAddress | unnumbered interfaceType Filter 1 interfaceSpecifier ] interface-ip-address Logs events for a specific interface ip-address Specifies that you will identify the interface by entering an IP address ipAddress IP address of interface for which you want to log events unnumbered Specifies that the interface is unnumbered interfaceType Type of interface for which you want to log events...
Page 198: Ospfhellopktsrcvd
JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Error enabling or disabling OSPF; allocation errors Error State change errors (for example, OSPF could not be enabled); errors creating or Warning Log destroying an area, an OSPF range, or a virtual link; error enabling OSPF protocol OSPF enabled or disabled;...
Page 199: Ospfhellopktssent
Chapter 14: O Commands router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of the virtual router for which you want to log events interface Logs events on a specific OSPF-enabled interface on the virtual router interfaceType Type of the interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifier Location of the interface in the appropriate format...
Page 200: Ospfinterface
JUNOSe 11.1.x System Event Logging Reference Guide NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. ospfInterface OSPF interface Description None Emergency None Alert None Critical Error saving or restoring OSPF interface configuration Error Errors for packets sent or received over the OSPF interface Warning Log...
Page 201: Ospflsa
Chapter 14: O Commands None Warning Log None Notice Log None Info LDP interactions Debug None Filter ospfLsa OSPF link-state advertisement (LSA) events Description None Emergency None Alert None Critical None Error LSA discard errors Warning Log LSA add, update, or delete events; LSA purge, refresh, and max-age events; LSA send Notice Log and receive events (Ack, delayed Ack, retransmit) None...
Page 202: Ospfneighbor
JUNOSe 11.1.x System Event Logging Reference Guide ospfNeighbor OSPF neighbor change Description None Emergency None Alert None Critical Neighbor MTU negotiation rejects Error Flooding event errors; neighbor transition from Full state to Down state; invalid Warning Log neighbor LSA requests; neighbor MTU negotiation mismatches Database description neighbor exchange;...
Page 203: Ospfpktssent
Chapter 14: O Commands Number of LSAs packed in different packet types (LSA Ack, LSA update); packets Notice Log received over Down interface None Info Packets received description Debug interface-ip-address See description of the ospfElectDr interface-ip-address filter Filter 1 for information about this filter router See description of the ospfElectDr router filter for information about this Filter 2 filter...
Page 204: Ospfroute
JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical Unexpected events during restart Error None Warning Log None Notice Log General information about significant restart operation events (for example, restart Info entry, exit, abort, and neighbor acquisition) Details about restart operation events Debug router See description of the ospfElectDr router filter for information about this...
Page 205: Ospfspfext
Chapter 14: O Commands router See description of the ospfElectDr router filter for information about this Filter 2 filter ospfSpfExt OSPF SPF external calculation Description None Emergency None Alert None Critical Errors in adding, modifying, or removing entries in tentative path entry table (TENT) Error and path entry table (PATH) None...
Page 206: Ospfspfintra
JUNOSe 11.1.x System Event Logging Reference Guide None Warning Log SPF chunking events (for example, number of LSAs processed in an SPF chunk) Notice Log SPF results Info Events in building TENT and PATH Debug interface-ip-address See description of the ospfElectDr interface-ip-address filter Filter 1 for information about this filter router See description of the ospfElectDr router filter for information about this...
Page 207: Ospftedatabase
Chapter 14: O Commands ospfTeDatabase OSPF traffic engineering database Description None Emergency None Alert None Critical Error in adding, deleting, or updating a record in the TE database Error None Warning Log None Notice Log General information about a record being added, deleted, or updated in the TE Info database None...
Page 208: Ospfv3Electdr
JUNOSe 11.1.x System Event Logging Reference Guide None Info None Debug router name virtualRouterName Filter router name Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events ospfv3ElectDr OSPFv3 designated router (DR) election Description None Emergency...
Page 209: Ospfv3General
Chapter 14: O Commands router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered Filter 2 interfaceType interfaceSpecifier ] ] router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events interface-ip-address Logs events for a specific interface on the virtual router ip-address Specifies that you will identify the interface by entering an IP address ipAddress IP address of interface for which you want to log events unnumbered Specifies that the interface is unnumbered...
Page 210: Ospfv3Hellopktsrcvd
JUNOSe 11.1.x System Event Logging Reference Guide router See description of the ospfElectDr router filter for information about this Filter 2 filter ospfv3HelloPktsRcvd Processing of hello messages received on OSPFv3-enabled interfaces Description None Emergency None Alert None Critical None Error Invalid packet, hello parameters mismatch (area, network, hello and dead intervals, Warning Log version, md5 digest)
Page 211: Ospfv3Interface
Chapter 14: O Commands None Error None Warning Log None Notice Log None Info Information about hello messages sent on OSPFv3-enabled interfaces (ip Debug source/destination, length) router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of the virtual router for which you want to log events interface Logs events on a specific OSPFv3-enabled interface on the virtual router...
Page 212: Ospfv3Lsa
JUNOSe 11.1.x System Event Logging Reference Guide router See description of the ospfElectDr router filter for information about this Filter 2 filter ospfV3Lsa OSPFv3 link-state advertisement (LSA) events Description None Emergency None Alert None Critical None Error LSA discard errors Warning Log LSA add, update, or delete events;...
Page 213: Ospfv3Pktsrcvd
Chapter 14: O Commands None Critical Neighbor MTU negotiation rejects Error Flooding event errors; neighbor transition from Full state to Down state; invalid Warning Log neighbor LSA requests; neighbor MTU negotiation mismatches; disregarding graceful restart notification (when graceful restart helper mode is not configured and the router gets a Grace LSA from a neighbor);...
Page 214: Ospfv3Pktssent
JUNOSe 11.1.x System Event Logging Reference Guide interface-ip-address See description of the ospfElectDr interface-ip-address filter Filter 1 for information about this filter router See description of the ospfElectDr router filter for information about this Filter 2 filter ospfv3PktsSent OSPFv3 packet sent Description None Emergency...
Page 215: Ospfv3Spfext
Chapter 14: O Commands Errors for routes imported into OSPF Warning Log Forwarding address decision algorithm events Notice Log OSPF route added to, replaced, or deleted from the routing table; route imported Info into OSPF None Debug interface-ip-address See description of the ospfElectDr interface-ip-address filter Filter 1 for information about this filter router See description of the ospfElectDr router filter for information about this...
Page 216: Ospfv3Spfinter
JUNOSe 11.1.x System Event Logging Reference Guide ospfV3SpfInter OSPFv3 SPF interarea calculation Description None Emergency None Alert None Critical Errors in adding, modifying, or removing entries in tentative path entry table (TENT) Error and path entry table (PATH) None Warning Log SPF chunking events (for example, number of LSAs processed in an SPF chunk) Notice Log SPF results...
Page 217 Chapter 14: O Commands SPF chunking events (for example, number of LSAs processed in an SPF chunk) Notice Log SPF results Info Events in building TENT and PATH Debug interface-ip-address See description of the ospfElectDr interface-ip-address filter Filter 1 for information about this filter router See description of the ospfElectDr router filter for information about this Filter 2 filter...
Page 218 JUNOSe 11.1.x System Event Logging Reference Guide ospfV3SpfIntra...
Page 219: Chapter 15 P Commands
Chapter 15 P Commands pimAutoRPRcvdLog on page 196 pimAutoRPSentLog on page 197 pimBsrRcvdLog on page 197 pimBsrSentLog on page 198 pimGracefulRestartLog on page 199 pimHelloRcvdLog on page 199 pimHelloSentLog on page 200 pimIpv6AutoRPRcvdLog on page 200 pimIpv6AutoRPSentLog on page 202 pimIpv6BsrRcvdLog on page 202 pimIpv6BsrSentLog on page 203 pimIpv6GracefulRestartLog on page 203...
Page 220 JUNOSe 11.1.x System Event Logging Reference Guide pimAutoRPRcvdLog Protocol Independent Multicast (PIM) AutoRP messages received Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Short description of received PIM AutoRP packets Info Complete print of received PIM AutoRP packets Debug interface-ip-address [ ip-address ipAddress | unnumbered interfaceType Filter 1...
Page 221 Chapter 15: P Commands ipAddress IP address of interface for which you want to log events unnumbered Specifies that the interface is unnumbered interfaceType Type of interface for which you want to log events interfaceSpecifier Location of unnumbered interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 222 JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical Parse errors Error Context errors Warning Log None Notice Log Description of received messages (specify high verbosity for detail) Info None Debug interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address Filter 1 filter for information about this filter router See description of the pimAutoRPRcvdLog router filter for information about...
Page 223: P Commands
Chapter 15: P Commands router See description of the pimAutoRPRcvdLog router filter for information about Filter 2 this filter pimGracefulRestartLog PIM graceful restart Description None Emergency None Alert None Critical None Error None Warning Log PIM graceful restart complete Notice Log None Info None...
Page 224 JUNOSe 11.1.x System Event Logging Reference Guide Complete printout of the received PIM hello messages Debug interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address Filter 1 filter for information about this filter router See description of the pimAutoRPRcvdLog router filter for information about Filter 2 this filter pimHelloSentLog...
Page 225 Chapter 15: P Commands None Error None Warning Log None Notice Log Short description of received PIM AutoRP packets Info Complete print of received PIM AutoRP packets Debug interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType Filter 1 interfaceSpecifier ] interface-ipv6-address Logs events for a specific interface ipv6-address Specifies that you will identify the interface by entering an IPv6 address ipv6Address IPv6 address of interface for which you want to log events...
Page 226 JUNOSe 11.1.x System Event Logging Reference Guide pimIpv6AutoRPSentLog Protocol Independent Multicast (PIM) AutoRP messages sent Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Short description of the sent PIM AutoRP packets Info Complete print of the sent PIM AutoRP packets Debug interface-ipv6-address See description of the pimIpv6AutoRPRcvdLog Filter 1...
Page 227 Chapter 15: P Commands Description of received messages (specify high verbosity for detail) Info None Debug interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address Filter 1 filter for information about this filter router See description of the pimAutoRPRcvdLog router filter for information about Filter 2 this filter pimIpv6BsrSentLog...
Page 228 JUNOSe 11.1.x System Event Logging Reference Guide None Critical None Error None Warning Log PIM graceful restart complete Notice Log None Info None Debug None Filter pimIpv6HelloRcvdLog Protocol Independent Multicast (PIM) hello messages received Description None Emergency None Alert None Critical None Error...
Page 229 Chapter 15: P Commands interfaceType Type of interface for which you want to log events interfaceSpecifier Location of unnumbered interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address | Filter 2 unnumbered interfaceType interfaceSpecifier ] ]...
Page 230 JUNOSe 11.1.x System Event Logging Reference Guide Complete description of the PIM hello messages sent Debug interface-ipv6-address See description of the pimIpv6HelloRcvdLog Filter 1 interface-ipv6-address filter for information about this filter router See description of the pimIpv6HelloRcvdLog router filter for information Filter 2 about this filter pimIpv6PktsRcvdLog...
Page 231 Chapter 15: P Commands None Critical None Error None Warning Log None Notice Log Short description of the PIM messages sent Info Complete description of the PIM messages sent Debug interface-ipv6-address See description of the pimIpv6HelloRcvdLog Filter 1 interface-ipv6-address filter for information about this filter router See description of the pimIpv6HelloRcvdLog router filter for information Filter 2 about this filter...
Page 232 JUNOSe 11.1.x System Event Logging Reference Guide pimPktsSentLog Protocol Independent Multicast (PIM) nonhello Description (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages sent None Emergency None Alert None Critical None Error None Warning Log None Notice Log Short description of the PIM messages sent Info Complete description of the PIM messages sent Debug interface-ip-address See description of the pimAutoRPRcvdLog interface-ip-address Filter 1...
Page 233 Chapter 15: P Commands Successful addition or removal of peer Info None Debug None Filter pimsmMvpn Multicast VPN events, including default and data MDT creation and deletion Description None Emergency None Alert None Critical Failure to create MDT Error None Warning Log Successful creation or deletion of default MDT;...
Page 234 JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log Successful attachment of policies to dynamic interfaces Info CAM resource allocation on a line module is exceeded; the particular policy fails to Debug be attached to the interface None Filter policyMgrGeneral Policy Manager general information Description...
Page 235 Chapter 15: P Commands None Error None Warning Log None Notice Log Packet trace Info None Debug None Filter Point-to-Point Protocol layer Description None Emergency None Alert Nonrecoverable error Critical Recoverable error Error Resource or configuration problem Warning Log Authentication actions Notice Log Downstream buffer slot and upstream buffer slot details Info...
Page 236 JUNOSe 11.1.x System Event Logging Reference Guide pppoe Point-to-Point over Ethernet layer Description None Emergency None Alert None Critical Error enabling control packet log Error PPPoE interface or subInterface removed from NVS Warning Log PPPoE enabled; status change for subInterface Notice Log Line module status change Info...
Page 237 Chapter 15: P Commands None Warning Log None Notice Log None Info Control packets logged; control packet log enabled Debug interface interfaceType interfaceSpecifier Filter interface Logs PPP events for a specific interface interfaceType Type of interface for which you want to log PPP events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide.
Page 238 JUNOSe 11.1.x System Event Logging Reference Guide NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. pppStateMachine PPP state machine trace Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log...
Page 239 Chapter 15: P Commands None Alert None Critical Profile manager process creation failed Error Profile being removed was not found Warning Log None Notice Log None Info Initialize profiles from NVS at startup; dump list of profiles after startup initialization; Debug read or save profile numbering seed to and from NVS;...
Page 240 JUNOSe 11.1.x System Event Logging Reference Guide profileMgr...
Page 241: Chapter 16 Q Commands
Chapter 16 Q Commands qm on page 217 qos on page 217 qosAttachment on page 218 Queue manager Description None Emergency None Alert None Critical Queue memory errors; line module queue errors; queue database synchronization Error errors None Warning Log None Notice Log None...
Page 242 JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical QoS object creation and modification failures due to resource limitations or Error configuration limitations; QoS profile to interface attachment failures; QoS failover messages reported by line module None Warning Log None Notice Log Modification, creation, and destruction of QoS objects;...
Page 243: Chapter 17 R Commands
Chapter 17 R Commands radiusAttributes on page 219 radiusClient on page 220 radiusCoAAttributes on page 220 radiusDisconnectGeneral on page 221 radiusRelayGeneral on page 222 radiusSendAttributes on page 222 remOps on page 223 resourceThresholdTrap on page 223 ripBfd on page 224 ripGeneral on page 225 ripRoute on page 225 ripRtTable on page 226...
Page 244 JUNOSe 11.1.x System Event Logging Reference Guide None Error None Warning Log None Notice Log None Info Supported RADIUS attributes found in the Access-Accept or Access-Reject packet; Debug reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140) None Filter radiusClient RADIUS Authentication and Accounting Client Description None...
Page 245 Chapter 17: R Commands None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Displays CoA requests and replies received by the router, including the attributes; Debug reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140); Agent Circuit ID, Agent Remote ID (DSL Forum VSA) and DHCP Option 82 None Filter...
Page 246 JUNOSe 11.1.x System Event Logging Reference Guide radiusRelayGeneral RADIUS Relay Server general Description None Emergency None Alert None Critical None Error Memory-allocation; NVS update failure; subscriber session timeouts Warning Log None Notice Log None Info Receiving invalid radius request. Debugging interaction with AAA/GPLAAN Debug None Filter...
Page 247 Chapter 17: R Commands Attributes that are added to outbound RADIUS requests, including Access-Request, Debug Acct-Start, Acct-Stop, interim accounting requests, tunnel accounting requests, and ICR partition accounting requests; IPv6 accounting VSA attributes (IPv6-Acct-Input-Octets [26-151], IPv6-Acct-Output-Octets [26-152], IPv6-Acct-Input-Packets [26-153], IPv6-Acct-Output-Packets [26-154], IPv6-Acct-Input-Gigawords [26-155], and IPv6-Acct-Output-Gigawords [26-156]) that are added to outbound RADIUS requests, including Acct-Stop and interim accounting requests;...
Page 248 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error Rising trap Warning Log Falling trap Notice Log None Info None Debug None Filter ripBfd RIP and BFD interaction and RIP session log Description None Emergency None Alert...
Page 249 Chapter 17: R Commands ripGeneral RIP system notifications Description None Emergency None Alert None Critical Failed to redistribute an external route to the RIP; failed to establish peer with Error neighbor due to the memory limitation; general RIP configuration error, such as an access list name or route map name specified in the RIP config mode exceed maximum allowable length Failed to process a RIP packet due to the current memory limitation...
Page 250 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Routes sent or received by RIP; if a route is rejected or not sent, gives the reason Debug interface interfaceType interfaceSpecifier Filter 1...
Page 251 Chapter 17: R Commands Failed to added a RIP route to the IP routing table Warning Log None Notice Log None Info Add or remove a route to the RIP routing table Debug None Filter routeDownloader RADIUS route-download server operation Description None Emergency...
Page 252 JUNOSe 11.1.x System Event Logging Reference Guide None Critical None Error None Warning Log Creation and deletion of virtual routers Notice Log None Info None Debug router virtualRouterName Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events rsvpAsyncMgr RSVP asynchronous manager events Description...
Page 253 Chapter 17: R Commands None Emergency None Alert None Critical None Error RSVP-TE client session create failed Warning Log None Notice Log BFD session create failed for IP address Info Delete BFD; RSVP-TE established session with BFD manager; Creating BFD session Debug for interface;...
Page 254 JUNOSe 11.1.x System Event Logging Reference Guide rsvpGracefulRestart RSVP graceful restart Description None Emergency None Alert None Critical None Error None Warning Log RSVP graceful restart complete Notice Log None Info None Debug None Filter rsvpInterface RSVP interface Description None Emergency None Alert...
Page 255 Chapter 17: R Commands router virtualRouterName [ interface interfaceType interfaceSpecifier ] Filter router Logs events for a specific virtual router virtualRouterName Name of virtual router for which you want to log events interface Logs events on a specific interface on the virtual router interfaceType Type of interface for which you want to log events interfaceSpecifier Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and...
Page 256 JUNOSe 11.1.x System Event Logging Reference Guide rsvpTunnel...
Page 257: Chapter 18 S Commands
Chapter 18 S Commands security on page 234 serviceability on page 234 serviceMgr on page 235 serviceMgrClientSession on page 235 serviceMgrDcm on page 236 serviceMgrMacroManager on page 236 serviceMgrPerformance on page 237 serviceMgrServiceDef on page 237 serviceMgrServiceInstance on page 238 serviceMgrServiceSession on page 238 serviceMgrSubscriberSession on page 239 slep on page 239...
Page 258 JUNOSe 11.1.x System Event Logging Reference Guide security CLI security messages Description None Emergency None Alert Suspected denial of service attack Critical None Error Unrecognized username, invalid password, denied host Warning Log User connect, user disconnect Notice Log vty allocation success and failure, vty disconnect. Info None Debug...
Page 259 Chapter 18: S Commands None Filter serviceMgr Service manager Description None Emergency None Alert None Critical Information about detected abnormalities during execution Error Information about exceeded thresholds Warning Log None Notice Log None Info Information about the code path executed along with values of parameters Debug None Filter...
Page 260 JUNOSe 11.1.x System Event Logging Reference Guide Information about the code path executed along with values of parameters Debug None Filter serviceMgrDcm Service manager DCM Description None Emergency None Alert None Critical Information about detected abnormalities during execution Error Information about exceeded thresholds Warning Log None Notice Log...
Page 261 Chapter 18: S Commands None Info Information about the code path executed along with values of parameters Debug None Filter serviceMgrPerformance Service manager performance Description None Emergency None Alert None Critical Information about detected abnormalities during execution Error Information about exceeded thresholds Warning Log None Notice Log...
Page 262 JUNOSe 11.1.x System Event Logging Reference Guide None Notice Log None Info Information about the code path executed along with values of parameters Debug None Filter serviceMgrServiceInstance Service manager service instance Description None Emergency None Alert None Critical Information about detected abnormalities during execution Error Information about exceeded thresholds Warning Log...
Page 263 Chapter 18: S Commands Information about exceeded thresholds Warning Log None Notice Log None Info Information about the code path executed along with values of parameters Debug None Filter serviceMgrSubscriberSession Service manager subscriber session Description None Emergency None Alert None Critical Information about detected abnormalities during execution Error...
Page 264 JUNOSe 11.1.x System Event Logging Reference Guide Remove or unbind interface failure; unknown or missing lower binding failure Error Attempt to set characteristics with invalid value Warning Log None Notice Log Hardware state change notification Info None Debug serial interfaceSpecifier Filter serial Logs SLEP events for a specific serial Cisco-HDLC interface interfaceSpecifier Identifier for a serial Cisco-HDLC interface...
Page 265 Chapter 18: S Commands snmpIfMib SNMP Interfaces MIB Description None Emergency None Alert None Critical Invalid ifTableLastChange reported by an interface Error Failed to process an interface for ifNumber MIB attribute computation Warning Log None Notice Log None Info None Debug None Filter...
Page 266 JUNOSe 11.1.x System Event Logging Reference Guide None Debug None Filter snmpSetPduAudit SNMP set PDUs Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log Identifies the following fields in SNMP set PDUs: source and destination IP address, Info PDU type, snmpVersion, requested, errorStatus, errorIndex, variable count, variable object identifier and data...
Page 267: Sonet
Chapter 18: S Commands SNMP trap PDUs that the corresponding SNMP agent transmitted Info None Debug None Filter sonet SONET Description None Emergency None Alert None Critical Configuration errors, NVS failures Error NV interface removal after failed init from NV; errors during interface add/update or Warning Log during hwPresent notification;...
Page 268: Sonetvt
JUNOSe 11.1.x System Event Logging Reference Guide Errors during interface removal (for removable paths); path update failures from path Warning Log configuration notification; failed mapping from SONET status; errors during path creation; engine addInterface errors during hwPresent notification; errors during path creation for nonchannelized interfaces;...
Page 269: Ssccdetailssc
Chapter 18: S Commands None Critical Failure of policy manager calls (detail) Error None Warning Log None Notice Log None Info Policy manager function call made; Policy manager attempts to get statistics Debug None Filter ssccDetailSsc SDX client (formerly SSCC) detail for SDX interaction Description None Emergency...
Page 270: Sscclacgeneral
JUNOSe 11.1.x System Event Logging Reference Guide None Alert None Critical Failure to get heap space; packet decode errors; SDX inconsistency errors; packet Error creation errors; failure of calls to policy manager (changing, attaching policy); attempt to manage unknown interface None Warning Log None...
Page 271: Ssh
Chapter 18: S Commands Secure Shell (SSH) Server Description None Emergency None Alert None Critical Cannot create SSH daemon; unexpected socket condition; packet overrun; AAA Error failure; resource allocation failure; host key read error Missing/invalid public user key; possible DoS attack (invalid reported field length); Warning Log unknown protocol message;...
Page 272: Sttunnelengine
JUNOSe 11.1.x System Event Logging Reference Guide ST interface pool exhausted; manual session key length input problems; problem Warning Log relocating ST interface ST interface memory pool extension Notice Log Transport virtual router table downloading; ST interface status retrieval; transport Info virtual router table down;...
Page 273 Chapter 18: S Commands None Alert Line module ping failure threshold exceeded; test failure on line module or standby Critical SRP module; test failure on line module or standby SRP module Error on line module or standby SRP module; critical subsystem failure condition Error (NVS, power, fan, network timing, temperature);...
Page 274 JUNOSe 11.1.x System Event Logging Reference Guide system...
Page 275: T Commands
Chapter 19 T Commands tacacsPlusServer on page 251 tcpGeneral on page 252 tcpTraffic on page 252 tcpv6Traffic on page 253 telnet on page 254 telnetClient on page 254 tftpClient on page 255 trackerEvents on page 255 trackerGeneral on page 256 tsm on page 257 tacacsPlusServer TACACS+ server...
Page 276 JUNOSe 11.1.x System Event Logging Reference Guide Authentication attempted while TACACS+ is being shutdown; not enough memory Debug for sending authentication requests; socket allocation limit reached; failed to allocate new socket for a request; not enough memory for protocol message; received unexpected notification on the socket None Filter...
Page 277 Chapter 19: T Commands None Warning Log TCP packet discards due to MD5 authorization failure and checksum failure Notice Log None Info Report all TCP receive and transmit events Debug remote-ip-address ipAddress [ ipAddressMask ] Filter 1 remote-ip-address Logs events for a remote address ipAddress Address of remote system for which you want to log messages ipAddressMask Mask for the remote address router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]...
Page 278 JUNOSe 11.1.x System Event Logging Reference Guide remote-ip-address ipAddress [ ipAddressMask ] Filter 1 remote-ip-address Logs events for a remote address ipAddress Address of remote system for which you want to log messages ipAddressMask Mask for the remote address router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ] Filter 2 router Logs events on a specific virtual router virtualRouterName Name of virtual router for which you want to log events...
Page 279 Chapter 19: T Commands None Alert None Critical None Error None Warning Log Unexpected socket condition; unable to connect to remote host; successful connection; Notice Log ENV send failure; resource allocation failure Connection attempt; detailed connection information (per connection); escape Info character announcement;...
Page 280 JUNOSe 11.1.x System Event Logging Reference Guide None Emergency None Alert None Critical None Error None Warning Log None Notice Log Indicates if there is a memory shortage for event propagation Info Provides debug information for event propagation from the tracker component Debug None Filter...
Page 281 Chapter 19: T Commands Tunnel server manager Description None Emergency None Alert Number of interfaces in use is critically close to maximum Critical Memory exhaustion errors Error Nonvolatile storage integrity problems; memory exhaustion-based denial of service; Warning Log number of interfaces in use reaching high levels Nonvolatile storage allocation problems;...
Page 282 JUNOSe 11.1.x System Event Logging Reference Guide...
Page 283: U Commands
Chapter 20 U Commands udpTraffic on page 259 udpv6Traffic on page 260 udpTraffic UDP frame transmit or receive Description None Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Report all UDP receive or transmit events Debug remote-ip-address ipAddress [ ipAddressMask ] Filter 1...
Page 284 JUNOSe 11.1.x System Event Logging Reference Guide remote-ip-address Logs events for a remote address ipAddress Address of remote system for which you want to log messages ipAddressMask Mask for the remote address udpv6Traffic UDPv6 packet transmit and receive events Description None Emergency None...
Page 285: Commands
Chapter 21 V Commands vrrp on page 261 vrrpTracking on page 262 vsm on page 262 vsmEngine on page 263 vrrp Virtual Router Redundancy Protocol Description None Emergency None Alert NVS error; out of resources; unexpected error Critical Virtual router ID (VRID) creation or modification failure; association addresses creation Error or modification failure IP interface used by VRRP was removed;...
Page 286 JUNOSe 11.1.x System Event Logging Reference Guide NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JUNOSe Command Reference Guide. vrrpIdentifier ID of the VRRP router for which you want to log events vrrpTracking Virtual Router Redundancy Protocol tracking Description None Emergency...
Page 287 Chapter 21: V Commands Out of pool space Notice Log Replay of unknown interface after high availability switchover Info General VSM operations, such as agent-circuit-id–based VLAN created Debug None Filter vsmEngine VLAN subinterface manager engine Description None Emergency None Alert None Critical None...
Page 288 JUNOSe 11.1.x System Event Logging Reference Guide vsmEngine...
Page 289 Part 3 Index Index on page 267 Index...
Page 290 JUNOSe 11.1.x System Event Logging Reference Guide Index...
Page 291: Index
Index log event categories.............23 aaaAtm1483Cfg............23 aaaEngineGeneral..........23 baseline commands aaaQosCfg............23 baseline log.............5 aaaServerGeneral..........23 aaaUserAccess............23 addressServerGeneral...........23 ar1AaaServerGeneral..........23 conventions atm...............23 notice icons............xxi atm1483...............23 text and syntax...........xxii atm1483VcClass...........23 customer support............xxiii atmAal5..............23 contacting JTAC..........xxiii atmVcClass............23 auditIpsec.............34 bfdAdaptivity............35 bfdEvents..............36 destination bfdGeneral............36 logging messages by..........5 bfdSession............37 documentation set bgpConnections............37 comments on.............xxiii bgpDampening.............38...
Page 292 JUNOSe 11.1.x System Event Logging Reference Guide dhcpCapture............47 ipAccessList............100 dhcpExternal............47 ipEngine.............101 dhcpExternalEngine..........47 ipflowstats............101 dhcpGeneral............47 ipflowstatsEngine..........102 dhcpIssuLog............47 ipGeneral............102 dhcpLocalClients...........47 ipIfCreator............103 dhcpLocalGeneral..........47 ipInterface............103 dhcpLocalHighAvailability........47 ipNhopTrackerGeneral........103 dhcpLocalPool............47 ipProfileMgr............103 dhcpLocalProtocol..........47 ipRoutePolicy............103 dhcpNvGeneral.............47 ipRouteTable............103 dhcpOfferLog............47 ipsecIdDb............103 dhcpPbeGeneral............47 ipsecP1Throttler..........103 dhcpProxyGeneral..........47 ipsecXcfgSM............103 dhcpRelayGeneral..........47 ipSubscriberMgr..........103 dhcpv6Client............47 ipTraffic..............103 dhcpv6DemuxGeneral..........47 ipTunnel.............103 dhcpv6LsGeneral..........47 ipv6AccessList............103...
Page 293 Index ldpGracefulRestart..........135 ospfNeighbor............177 ldpHelloMessages..........136 ospfPktsRcvd............177 ldpHelloMgr............137 ospfPktsSent............177 ldpInterface............137 ospfRestart............177 ldpMessages............138 ospfRoute............177 ldpPeer...............139 ospfSpfExt............177 ldpShimInterface..........139 ospfspfInter............177 ldpSocket............140 ospfSpfIntra............177 ldpTimer.............141 ospfTeDatabase..........177 ldpVpls..............141 ospfTeSpf............177 ldpWorker............142 ospfv3ElectDr.............177 localAddressServerGeneral........142 ospfv3General.............177 localAuthServer...........143 ospfv3HelloPktsRcvd..........177 localEnableAuthServer........143 ospfv3HelloPktsSent...........177 localLinePassword..........144 ospfv3Interface...........177 macroData............146 ospfV3Lsa............177 mgtmGeneral............147 ospfv3Neighbor..........177 mgtmGracefulRestart..........148 ospfv3PktsRcvd..........177 mgtmv6General..........148 ospfv3PktsSent...........177 mgtmv6GracefulRestart........149 ospfv3Route............177 mldGeneral............150 ospfV3SpfExt............177...
Page 294 JUNOSe 11.1.x System Event Logging Reference Guide radiusClient............196 tsm..............257 radiusCoAAttributes..........196 udpTraffic............259 radiusDisconnectGeneral........196 udpv6Traffic............260 radiusRelayGeneral..........196 vrrp..............261 radiusSendAttributes...........196 vrrpTracking............262 remOps...............196 vsm..............262 resourceThresholdTrap........196 vsmEngine............263 ripBfd..............196 ripGeneral............196 ripRoute..............196 ripRtTable............196 manuals routeDownloader..........196 comments on.............xxiii routerLog............196 rsvpAsyncMgr.............196 rsvpBfd...............196 rsvpGeneral............196 notice icons..............xxi rsvpGracefulRestart..........196 rsvpInterface............196 rsvpTunnel............196 security...............196 platform considerations serviceability............196 system logs.............5 serviceMgr............196...

This manual is also suitable for:

Junose 11.1.x

Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

About the Documentation

Part 1 Chapters

Chapter 1 System Logging Overview

Chapters

System Logging Overview

Chapter 2 Event Categories

Chapter 3 A Commands

Chapter 4 B Commands

Chapter 5 C Commands

Chapter 6 D Commands

Chapter 7 E Commands

Chapter 8 F Commands

Chapter 9 G and H Commands

Chapter 10 I Commands

Chapter 11 L Commands

L Commands

Chapter 12 M Commands

Chapter 13 N Commands

Chapter 14 O Commands

Chapter 15 P Commands

P Commands

Chapter 16 Q Commands

Chapter 17 R Commands

Chapter 18 S Commands

Chapter 19 T Commands

Chapter 20 U Commands

Chapter 21 V Commands

Commands

Index

Quick Links

Related Manuals for Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010

Summary of Contents for Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010