Isis Csnp-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

isis csnp-interval

isis csnp-interval seconds [ level-1 | level-2 ]
Syntax
no isis csnp-interval [ seconds ] [ level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the IS-IS CSNP interval for the specified interface. The no version restores
Description
the default value.
Options
Interface Configuration, Subinterface Configuration
Mode
seconds Number in the range 0–65535; the interval of time in seconds between
the transmission of CSNPs on multiaccess networks for the designated router;
default value is 10 seconds, except for WAN interfaces, where the default value
is 0
level-1 Sets the interval of time between transmission of CSNPs for level 1
independently
level-2 Sets the interval of time between transmission of CSNPs for level 2
independently
Chapter 10: I Commands
1125
isis csnp-interval