Message-Digest-Key Md5 - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

message-digest-key md5

message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey
Syntax
no message-digest-key keyID
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables OSPF MD5 authentication for the remote-neighbor interface and configures
Description
the MD5 key. The no version deletes an MD5 key.
NOTE: If all the MD5 keys have been deleted, the authentication type is still MD5,
but you need to configure MD5 keys.
To disable MD5 authentication for the remote-neighbor interface, use the
authentication-none command.
Options
Remote Neighbor Configuration
Mode
keyID Key identifier in the range 1–255
md5 Specifies use of the MD5 algorithm
0 Indicates the msgDigestKey is entered in unencrypted form (plaintext); this
is the default option
8 Indicates the msgDigestKey is entered in encrypted form (ciphertext)
msgDigestKey OSPF password; string of up to 16 alphanumeric characters
Chapter 13: M Commands
message-digest-key md5
1315