Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

enable

To access Privileged Exec mode:
Syntax
enable [ level ]
To enable event or trigger configuration:
[ no ] enable
Command introduced before JUNOSe Release 7.1.0.
Release Information
From User Exec mode, enters Privileged Exec mode at the specified privilege level.
Description
There is no no version for this use.
From SNMP Event Configuration or SNMP Trigger Configuration modes, enables the
configuration for the event or trigger, respectively. The no version disables the event
or trigger.
Options
SNMP Event Configuration, SNMP Trigger Configuration, User Exec
Mode
level—level at which you want to access the Privilege Exec mode; default value
is 10; commands generally fall into one of the following security/privilege levels:
0 allows the user to execute the help, enable, disable, and exit commands
1 Allows the user to execute commands in User Exec mode plus commands
at level 0
5 Allows the user to execute Privileged Exec show commands plus the
commands at levels 1 and 0
10 Allows the user to execute all commands except support commands,
which may be provided by Juniper Networks Customer Service, or the ability
to assign privileges to commands
15 Allows the user to execute support commands and assign privileges to
commands
Chapter 6: E Commands
557
enable