Mark-Clp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mark-clp

[ no ] [ suspend ] mark-clp clpValue
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Marks the CLP bit in the ATM header of packets matching the current classifier control
Description
list. The no version removes the mark rule from a policy list; the suspend version
temporarily suspends a mark rule; the no suspend version resumes application of
a suspended rule.
Options
Classifier Group Configuration
Mode
Related Topics
1268
mark-clp
clpValue Value of the CLP bit, 0 or 1
Assigning Values to the ATM CLP Bit
Policy Rule Precedence