Idle-Character - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

idle-character

idle-character { flags | marks }
Syntax
no idle-character
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the HDLC idle character that is transmitted between HDLC packets. The
Description
no version restores the default value.
Options
Interface Configuration
Mode
698
idle-character
flags Sets the idle character to 0x7E; the default value
marks Sets the idle character to 0xFF