Frame-Relay Fragment - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

frame-relay fragment

frame-relay fragment [ [ fragmentSize ] [ fragmentation-only ] | reassembly-only ]
Syntax
no frame-relay fragment
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures fragmentation and reassembly for the map class created with the
Description
map-class frame-relay command. The no version stops fragmentation and/or
reassembly on the subinterface.
Options
Map Class Configuration
Mode
644
frame-relay fragment
fragmentSize—Maximum payload size of a fragment in bytes; a number in the
range 16–8188; default value is 52
fragmentation-only Specifies fragmentation only
reassembly-only Specifies reassembly only