Ipv6-Local-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6-local-interface

ipv6-local-interface { loopback interfaceSpecifier | ipv6Prefix }
Syntax
no ipv6-local-interface
Command introduced before JUNOSe Release 7.1.0.
Release Information
Maps a domain name to a loopback interface. The no version deletes the mapping
Description
to the user domain name.
Options
Domain Map Configuration
Mode
1034
ipv6-local-interface
interfaceSpecifier—Particular loopback interface
ipv6Prefix Prefix that defines the IPv6 interface in the format ipv6Address /
length, where
ipv6Address—Base IPv6 address of the loopback interface (for example,
::ffff:a:b:c:d)
length Length of the network prefix; number of bits masking base address
to produce address to be matched