Ip Pim Rp-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip pim rp-address

[ no ] ip pim rp-address ipAddress [ ipAccessList ] [ override ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a static PIM group–to–RP mapping. The no version clears the mapping
Description
from this interface.
Options
Global Configuration
Mode
ipAddress IP address of the router you want to designate as an RP router
ipAccessList Name of the IP access list that specifies which multicast groups
use this RP
override Specifies that this static RP mapping has priority over group-to-RP
mappings learned by auto-RP
Chapter 10: I Commands
903
ip pim rp-address