JUNOSe 11.1.x Command Reference Guide A to M
match ipv6 route-source
match ipv6 route-source prefixListName [ prefixListName ]*
Syntax
no match ipv6 route-source [ prefixListName ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches any routes that are advertised from addresses contained in the specified
Description
prefix list. The no version removes all route-source match clauses from a route map
unless you specify a prefix list, in which case only that prefix list match is removed
from the route map.
Options
Policy List Configuration, Route Map Configuration
Mode
1284
match ipv6 route-source
prefixListName—Name of a single prefix list; string of up to 32 characters
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line