Mode - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mode

mode { file-system-synchronization | high-availability }
Syntax
no mode
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables high availability mode (hitless SRP switchover) operation. The no version
Description
returns high availability mode operation to its default (file-system-synchronization).
Options
Redundancy Configuration
Mode
1330
mode
file-system-synchronization Uses file synchronization to keep the configuration
of the standby SRP coordinated with the configuration of the active SRP
high-availability Uses mirroring to keep the configuration and state of the
standby SRP coordinated with the configuration and state of the active SRP