Ip Vrrp Authentication-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip vrrp authentication-type

ip vrrp vrid authentication-type { none | text }
Syntax
no ip vrrp vrid authentication-type
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the VRRP authentication type. The no version restores the default value,
Description
none.
Options
Interface Configuration
Mode
976
ip vrrp authentication-type
vrid VRID identifier; a number in the range 1–255
none Disables authentication
text Specifies simple text password