Ip Ospf Authentication Message-Digest - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip ospf authentication message-digest

[ no ] ip ospf authentication message-digest
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that the authentication mode for the interface is MD5. The no version sets
Description
authentication for the interface to none, but leaves any configured MD5 key intact.
Interface Configuration, Subinterface Configuration
Mode
882
ip ospf authentication message-digest