Erase Secrets - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

erase secrets

erase secrets seconds
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes all CLI passwords or secrets. Execute before pressing the NMI button on
Description
the SRP module. There is no no version.
NOTE: If you enter the service unattended password-recovery command, the
behavior of the erase secrets command changes. The erase secrets command will
not take any parameters and will not be available through a vty session until you
enter no service unattended password-recovery.
Options
User Exec
Mode
578
erase secrets
seconds Number of seconds in the range 1–60 to allow for the operation