Ip Nat - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip nat

[ no ] ip nat { inside | outside }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Marks interfaces that participate in NAT translation as residing on the inside or the
Description
outside network. The no version unmarks the interface so that it does not participate
in NAT translation.
Options
Interface Configuration, Profile Configuration
Mode
inside—Specifies that the interface resides on the inside (private) portion of the
network. The inside portion of the network uses nonroutable IP addresses.
outside Specifies that the interface resides on the outside (public) portion of
the network. The outside portion of the network (for example, the Internet) uses
routable legitimate addresses.
Chapter 10: I Commands
871
ip nat