Ip Mtu - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip mtu

[ no ] ip mtu [ mtuSize ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum transmission unit size of IP packets sent on an interface. The no
Description
version restores the default value.
Options
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
862
ip mtu
mtuSize—Maximum number of packet transmissions permitted on an interface;
in the range 160–10240; default value is 0, which means that the router takes
the value from a lower protocol layer