Committed-Rate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

committed-rate

committed-rate { rate | parameterName percentage percentValue }
Syntax
no committed-rate
Command introduced before JUNOSe Release 7.1.0.
Release Information
parameterName and percentValue variables added in JUNOSe Release 8.1.0.
Sets the committed rate for a rate-limit profile as a specified value or as a percentage
Description
of a reference rate defined in the specified policy parameter. The no version restores
the default value, 0.
Options
Rate Limit Profile Configuration
Mode
Related Topics
rate Rate in bits per second in the range 0–4294967295
parameterName Name of policy parameter up to 40 characters
percentValue Percentage in the range 0–100
Creating a Two-Rate Rate-Limit Profile
Setting the Committed Rate for a Rate-Limit Profile
Chapter 4: C Commands
449
committed-rate