Isis Metric - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

isis metric

isis metric defaultMetric [ level-1 | level-2 ]
Syntax
no isis metric [ defaultMetric | level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the metric (cost) for the interface to links at the specified level. If no level
Description
is specified, the cost is applied to both level 1 and level 2 links. The no version restores
the default metric value.
Options
Interface Configuration, Subinterface Configuration
Mode
defaultMetric—Metric used for the redistributed route; a number in the range
0–63 if the router is configured with the metric-style narrow command; a
number in the range 0–16777215 if the router is configured with the metric-style
transition or metric-style wide command; default value is 10
level-1 Applies metric to level 1 links
level-2 Applies metric to level 2 links
Chapter 10: I Commands
1133
isis metric