Enrollment Retry-Period - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 6: E Commands

enrollment retry-period

enrollment retry-period minutes
Syntax
no enrollment retry-period
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of minutes that the router waits after receiving no response
Description
before resending a certificate request to the CA. The no version restores the default.
minutes Number of minutes in the range 0–60 minutes; default value is 1
Options
IPSec CA Identity Configuration
Mode
575
enrollment retry-period