Ip Prefix-Tree - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip prefix-tree

ip prefix-tree treeName { description desc | { permit | deny } ipPrefix }
Syntax
no ip prefix-tree treeName [ description | { permit | deny } ipPrefix ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a prefix tree for best-match route filtering; specifies a tree entry a deny or
Description
permit clause for a network address. The no version removes the specified prefix
tree or the specified tree entry.
Options
Router Configuration
Mode
916
ip prefix-tree
treeName Name of the prefix list; a string of up to 32 characters
desc Description of the prefix list
deny If the prefix of the route being filtered matches the specified prefix and
deny is specified, the route is not redistributed
permit If the prefix of the route being filtered matches the specified prefix and
permit is specified, the route is redistributed as controlled by the set actions
ipPrefix Network route to be filtered, in the format network / length, where
network Base address of the network route to be filtered; for example,
192.168.32.0 or 10.10.0.0
length Length of the network prefix; number of bits masking base address
to produce address to be matched