Ipv6 Mld Query-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 mld query-interval

ipv6 mld query-interval seconds
Syntax
no ipv6 mld query-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets how often the router sends MLD host-query packets from this interface. The no
Description
version restores the default value, 125 seconds.
seconds Polling interval in the range 0–65535 seconds
Options
Interface Configuration, Profile Configuration
Mode
1049
ipv6 mld query-interval