Logout Subscribers - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

logout subscribers

logout subscribers { all | domain domainName | icr-partition icrPartitionId |
Syntax
port interfaceSpecifier | username userName | virtual-router vrName }
Command introduced before JUNOSe Release 7.1.0.
Release Information
icr-partition keyword and icrPartitionLocationId variable added in JUNOSe Release
10.3.0
Logs out the authenticated PPP or DHCP local server users. Also, logs out subscribers
Description
based on the ICR partition ID. There is no no version.
Options
Privileged Exec
Mode
1254
logout subscribers
all Logs out all PPP or DHCP local server sessions.
domainName Active PPP or DHCP local server session whose usernames have
that domain name.
icr-partition Logs out subscribers based on the location ID of the partition in
the ICR cluster.
icrPartitionLocationID A unique identifier for each ICR partition on a chassis;
a maximum of 128 characters. Note that this ID different from the partition ID,
which is configured using the ip vrrp vrid icr-partition partitionId command.
The partition location ID that you specify here is a combination of the interface
within the chassis on which the ICR partition is configured and the VRRP ID,
which is system-defined and nonconfigurable.
interfaceSpecifier—Location of the port with active PPP subscribers; format varies
according to interface type; see "Interface Types and Specifiers" on page 5.
userName Active PPP or DHCP local server session whose names match the
username.
vrName Active PPP or DHCP local server session whose interfaces are bound
to a specific virtual router.