Ip Igmp Oif-Map - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip igmp oif-map

[ no ] ip igmp oif-map mapName { interfaceType interfaceSpecifier | self }
Syntax
[ groupPrefix [ sourcePrefix ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates an outgoing interface (OIF) map. The no version removes an outgoing
Description
interface map attribute or the entire outgoing interface map.
Options
Global Configuration
Mode
mapName Name of the OIF map
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
self Specifies that the multicast outgoing interface is the same as IGMP join
interface
groupPrefix Group prefix in the form ipAddress/maskLength
sourcePrefix Source prefix in the form ipAddress/maskLength
Chapter 10: I Commands
825
ip igmp oif-map