Lacp Port-Priority - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 12: L Commands

lacp port-priority

lacp port-priority portPriority
Syntax
no lacp port-priority
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the priority for an Ethernet member link, also known as an Ethernet port, in an
Description
IEEE 802.3ad link aggregation group (LAG) bundle. The member link with the lowest
numerical priority value has the highest priority. The Ethernet member link with the
highest priority is selected first to join the LAG bundle. The no version restores the
default priority value, 32768.
portPriority Priority value; integer in the range 0–65535; default value is 32768
Options
Interface Configuration
Mode
1209
lacp port-priority