Ip Unnumbered - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip unnumbered

[ no ] ip unnumbered interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables IP processing on an interface without assigning an explicit IP address to the
Description
interface. The no version disables IP processing on the interface.
Options
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
966
ip unnumbered
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5