Clns Host - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clns host

clns host name nsap
Syntax
no clns host name
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a name-to-NSAP mapping that can then be used with commands requiring
Description
NSAPs. Enables dynamic resolution of hostnames to system IDs (within the NSAP
address). The hostname mapping is sent in the LSPs within the dynamic hostname
TLV tuple. Display the TLV by issuing the show isis database detail command. Use
the show hosts command to display the mapping. The no version restores the default
of no mapping defined.
Options
Global Configuration
Mode
436
clns host
name Name for the NSAP; first character can be either a letter or a number. If
a number is used, the operations you can perform are limited.
nsap NSAP to which that name maps