Ip Flow-Cache Entries - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip flow-cache entries

ip flow-cache entries cacheEntries
Syntax
no ip flow-cache entries
Command introduced before JUNOSe Release 7.1.0.
Release Information
Limits the number of entries in the flow cache (for all line modules in the router).
Description
The no version sets the number of entries back to its default value.
Options
Global Configuration
Mode
cacheEntries Number of cache entries allowed for all line modules in the router
in the range 1024–524288; default value is 65536
Chapter 10: I Commands
801
ip flow-cache entries