Isis Network Point-To-Point - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

isis network point-to-point

[ no ] isis network point-to-point
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the IS-IS circuit type as point-to-point. Issuing this command tears down
Description
existing adjacencies, originates or flushes LSPs, and establishes new adjacencies.
The no version restores the default, treating the circuit as a broadcast circuit.
Interface Configuration
Mode
1134
isis network point-to-point