L2Tp Destination Profile - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp destination profile

l2tp destination profile { profileName [ [ virtual-router vrName ]
Syntax
ip address ipAddress ] | [ virtual-router vrName ] ip address ipAddress }
no l2tp destination profile { profileName |
[ virtual-router vrName ] ip address ipAddress }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates or accesses a destination profile that defines the location of a LAC. The no
Description
version removes the L2TP destination profile.
Options
Global Configuration
Mode
1162
l2tp destination profile
profileName Name of the L2TP destination profile
vrName Name of the virtual router to be used to reach the destination (that is,
the LAC). If you do not specify a virtual router, the current virtual router context
is used.
ipAddress IP address to be used to reach the destination