Controller E3 - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

controller e3

controller e3 interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Accesses Controller Configuration mode so that you can configure an E3 controller.
Description
There is no no version.
Options
Global Configuration
Mode
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 4: C Commands
461
controller e3