Ipv6 Share-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 share-interface

ipv6 share-interface interfaceType interfaceSpecifier
Syntax
no ipv6 share-interface
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the layer 2 interface that an IPv6 interface will share in the current virtual
Description
router. The no version removes the association between the layer 2 interface and
the shared IPv6 interface.
Options
Interface Configuration
Mode
1118
ipv6 share-interface
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5