Ip Virtual-Router - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip virtual-router

[ no ] ip virtual-router vrName
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a virtual router in an IP profile. Dynamic interfaces created with the profile
Description
are assigned to this VR. The no version removes the VR from the profile; if a VR is
not specified via RADIUS, then any subsequent creation process for dynamic interfaces
using the profile fails.
vrName Name of the virtual router; a string of 1–15 alphanumeric characters
Options
Profile Configuration
Mode
969
ip virtual-router