Metric-Style Transition - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

metric-style transition

[ no ] metric-style transition [ level-1 | level-2 | level-1-2 ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the router to generate and accept both old-style IS-IS TLVs with narrow
Description
(six-bit) metric fields and new-style IS-IS TLVs with wider metric fields. If you issue
this command, the value configured with the isis metric command can range from
0–16777215. The no version restores the default value, which is to generate and
accept only old-style TLVs with narrow (six-bit) metric fields.
Options
Router Configuration
Mode
1318
metric-style transition
level-1 Configuration applies only to level 1 routing
level-2 Configuration applies only to level 2 routing
level-1-2 Configuration applies to both level 1 and level 2 routing