Interface Serial - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

interface serial

[ no ] interface serial interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the location of the serial interface on CT3 and COCX-F3 modules. The no
Description
version disables the interface.
Options
Global Configuration
Mode
Related Topics
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Configuring Frame Relay Layer 2 Services and Configuring HDLC Layer 2 Services
in the JUNOSe BGP and MPLS Configuration Guide
Chapter 10: I Commands
731
interface serial