Ip Mobile Secure Foreign-Agent - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip mobile secure foreign-agent

ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal | ascii
Syntax
asciiKeyVal } [ replay timestamp within seconds ] [ algorithm { hmac-md5 |
keyed-md5 } ]
no ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal |
ascii asciiKeyVal }
Command introduced in JUNOSe Release 9.0.0.
Release Information
Configures the security associations for a foreign agent by specifying a security
Description
parameter index (SPI) value and an authentication key. You can specify the interval
within which a registration request can exceed the home agent configured time value
by specifying the replay timestamp within keyword. The no version deletes the
security associations for the specified foreign agent on the virtual router.
Options
Global Configuration
Mode
858
ip mobile secure foreign-agent
ipAddress IP address of the foreign agent
spi Security parameter index (SPI) value, a specific 4-octet hexadecimal number,
in the range 0x100–0xFFFFFFFF, that authenticates inbound requests and permits
authentication for outbound registration requests
hexKeyVal 128-bit hexadecimal number, in the range 0x0–0xFFFFFFFE, that
specifies the authentication key for a specific security association
asciiKeyVal 128-bit alphanumeric value, up to a maximum of 16 characters,
that specifies the authentication key for a specific security association
seconds Number of seconds, in the range 1–255, by which a registration request
can exceed the home agent configured time value; default value is 7 seconds
hmac-md5 Specifies the authentication algorithm for Mobile IP messages,
default value is hmac-md5
keyed-md5 Specifies the authentication algorithm for Mobile IP messages