Ipv6 Route-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 route-type

For BGP
Syntax
ipv6 route-type [ unicast | both ]
no ipv6 route-type
For OSPF
ipv6 route-type [ unicast | multicast | both ]
no ipv6 route-type
Command introduced before JUNOSe Release 7.1.0.
Release Information
For BGP, specifies whether BGP IPv6 routes are available only for other unicast
Description
protocols or for both unicast protocols and multicast protocols to perform RPF checks.
The no version restores the default value, unicast.
For OSPF, specifies whether OSPF IPv6 routes are available only for unicast
forwarding, only for multicast reverse path forwarding checks, or for both. The no
version restores the default value, both.
Options
Router Configuration
Mode
unicast Specifies that routes for the protocol are available only for unicast
forwarding
both Specifies that routes for the protocol are available for both unicast
forwarding and multicast route path forwarding checks
multicast Specifies that routes for the protocol are available only for multicast
route path forwarding checks
Chapter 10: I Commands
1115
ipv6 route-type