Ip Redirects - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip redirects

[ no ] ip redirects
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the sending of redirect messages if the software is forced to resend a packet
Description
through the same interface on which it was received. The no version disables the
sending of redirect messages.
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
920
ip redirects