Disconnect-Cause - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 5: D Commands

disconnect-cause

[ no ] disconnect-cause
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables an E Series LNS to generate, for the L2TP session to which the L2TP host
Description
profile applies, a PPP Disconnect Cause Code attribute value pair (AVP) and include
it in all L2TP Call-Disconnect-Notify (CDN) messages that it sends to an LAC. This
action provides a mechanism for the LAC to obtain information about the cause of
a session disconnection. The no version disables generation of the PPP Disconnect
Cause Code AVP, which is the default setting.
L2TP Destination Profile Host Configuration
Mode
525
disconnect-cause