Lacp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

lacp

lacp { active | passive }
Syntax
no lacp
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures whether an Ethernet link in an IEEE 802.3ad link aggregation group (LAG)
Description
bundle participates actively or passively in the Link Aggregation Control Protocol
(LACP). LACP controls the transmission of protocol data units (PDUs) to exchange
information between partner links in a LAG bundle. By default, Ethernet links do not
send LACP PDUs. The no version restores the default behavior.
Options
Interface Configuration
Mode
1208
lacp
active Causes the Ethernet link to always transmit LACP PDUs, regardless of
whether its partner link is set to active or passive LACP participation
passive Causes the Ethernet link to transmit LACP PDUs only when it receives
LACP PDUs from its partner link