Flash-Disk Scan - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

flash-disk scan

flash-disk scan [ repair ] [ disk0 | disk1 ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
disk0 and disk1 keywords added in JUNOSe Release 7.2.0.
Privileged Exec mode added in JUNOSe Release 8.0.0.
Scans the flash card on the primary SRP module to detect corrupt sectors, deletes
Description
files and directories that contain corrupt sectors, and fixes nonfatal errors. There is
no no version.
Options
Boot, Privileged Exec
Mode
634
flash-disk scan
repair Repairs nonfatal errors detected on flash disk
disk0 Specifies flash card in slot 0 of the SRP module; default value is disk0;
available only in Boot mode, because disk0 cannot be in an unmounted state in
a router outside of Boot mode
disk1 Specifies flash card in slot 1 of the SRP module; supported only on the
E120 router and the E320 router