Ip Pim Send-Rp-Announce - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip pim send-rp-announce

ip pim send-rp-announce interfaceType interfaceSpecifier scope ttl
Syntax
[ group-list ipAccessList] [ interval seconds ]
no ip pim send-rp-announce interfaceType interfaceSpecifier [ scope ttl ]
[ group-list ipAccessList ] [ interval seconds ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sends autoRP announcement messages from a router you configured as an RP. The
Description
no version clears the specified filters from this interface.
Options
Global Configuration
Mode
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see "Interface Types and Specifiers" on page 5. The autoRP announcement
messages will contain the IP address for this interface.
ttl Time-to-live value; the number of hops for which the announcement is valid
in the range 1–65535; default value is 64 hops
ipAccessList Name of the IP access list that specifies which multicast groups
use this RP; default value is no access list
seconds—Time interval in the range 1–65535 seconds at which the router sends
the announcements; default value is 60 seconds
Chapter 10: I Commands
ip pim send-rp-announce
905